View LQW15AXXXXX_42363.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
CHIP COILS
Murata Manufacturing Co., Ltd.
Cat.No.O05E-9
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
CONTENTS
Part Numbering Products Guide Selection Guide High Frequency 1 2 3 4 5 Monolithic Type Film Type Winding Type Winding Type Winding Type LQG15H/LQG18H Series LQP03T/LQP15T/LQP15M/LQP18M Series LQW15A/LQW18A Series LQW2BH/LQW31H Series LQH31H Series 6 10 19 25 29 2 4 5
1
2
3
4
5
6
for General Use 6 7 for Choke 8 9 10 11 Monolithic Type Winding Type Magnetic Shielded Type LQM21D/LQM21F/LQM31F Series LQH31C/LQH32C/LQH43C Series LQH3KS Series 40 43 48 50 54 58 59 61 71 Monolithic Type Winding Type LQM18N/LQM21N Series LQH31M/LQH32M/LQH43M (N) Series 30 34
7
8
9
Winding/Magnetic Shielded Type LQH55D/LQH66S Series
10
Notice (Soldering and Mounting) Notice Packaging Design Kits Information
11
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U. S. A.
Recycled Paper
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
o Part Numbering
Chip Coils (SMD)
(Global Part Number) qProduct ID Product ID LQ wStructure Code G H M P W eDimensions (LgW) Code 03 15 18 21 2B 31 32 3K 43 55 66 Dimensions (LgW) 0.6g0.3mm 1.0g0.5mm 1.6g0.8mm 2.0g1.25mm 2.0g1.5mm 3.2g1.6mm 3.2g2.5mm 3.3g3.3mm 4.5g3.2mm 5.7g5.0mm 6.3g6.3mm EIA 0201 0402 0603 0805 0805 1206 1210 1212 1812 2220 2525 iFeatures Code rApplications and Characteristics Code H N D F M T A H N M D C S H tCategory Code N Category Standard Type LQH LQP LQW LQM Series LQG Applications and Characteristics Monolithic Air-core for Resonant Circuit for Choke (Low-current DC Power Supplies) for Choke (DC Power Supplies) Film Type Film Type (Low DC Resistance Type) High Q Type (UHF-SHF) High Q Type (VHF-UHF) for Resonant Circuit for Resonant Circuit (Coating Type) for Choke for Choke (Coating Type) for Choke (Magnetically Shielded Type) for High-frequency Resonant Circuit oElectrode *Lead (Pb) Free Code 0 2 3 Electrode Sn Series LQG18H/LQP03T/LQWppA/LQM LQG15H/LQP (Except LQP03T) 1 0 Features Series Structure Monolithic Type (Air-core Coil) Winding Type (Ferrite Core) Monolithic (Ferrite Core) Film Type Winding Type (Air-core Coil) uInductance Tolerance Code B C D G H J K M N S W Inductance Tolerance 0.1nH 0.2nH 0.5nH 2% 3% 5% 10% 20% 30% 0.3nH 0.05nH Chip Coils LQ q H 32 M N 331 K y 2 3 L yInductance Expressed by three figures. The unit is micro-henry (H). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. If inductance is less than 0.1H, the inductance code is expressed by a combination of two figures and the capital letter "N", and the unit of inductance is nano-henry (nH). The capital letter "N" indicates the unit of "nH", and also expresses a decimal point. In this case, all figures are significant digits. u i o !0
the "Global Part Numbers" that have been adopted ( The structure ofquestions about details, please inquire at your usualsince June 2001 andorthe meaning of each code are described herein. ) If you have any Murata sales office distributor.
we
rt
Standard Type LQG/LQP/LQW/LQM*1/LQH*2 High-Q/ Low DC Resistance Standard Type Low DC Resistance Standard Type Low DC Resistance Low Profile Type LQW18A/LQW2BH LQM21N LQH32C LQH32C/LQH32M/LQH3KS LQH32C LQH32C/LQH3KS
2 3 5
*1 : Except LQM21N series *2 : Except LQH32/LQH3K series
LF Solder LQWppH/LQH
Continued on the following page.
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Continued from the preceding page.
(Global Part Number) !0Packaging Code K L B J D
LQ q
H
32
M
N
331 K y
2
3
L
we
rt
u i o !0
Packaging Plastic Taping (o330mm Reel) Plastic Taping (o180mm Reel) Bulk Paper Taping (o330mm Reel) Paper Taping (o180mm Reel)
Series LQH*1 /LQWppH/LQM31F/LQM21*2 LQH/LQWppH/LQM31F/LQM21*2 All series LQW18A/LQG/LQM18N/LQM21*3 /LQP*4 LQWppA/LQG/LQM18N/LQM21*3 /LQP
*1 Except LQH43C/LQH66S *2 LQM21D(22 - 47H)/LQM21F(4.7 - 47H)/LQM21N(2.7 - 4.7H) only. *3 LQM21D(1.0 - 10H)/LQM21F(1.0 - 2.2H)/LQM21N(0.1 - 2.2H) only. *4 Except LQP15T
3
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Products Guide
Murata's LQ- series of chip coils consists of compact, high-performance inductors. Their innovative coil and case structures mean low DC resistance and outstanding high-frequency characteristics. The series is designed for a variety of applications, facilitating component selection for individual circuit requirements.
Dimensions Application Part Number LQG15H High frequency range LQG18H LQP03T LQP15T Film LQP15M Tight inductance tolerance LQP18M LQW15A LQW18A Winding (air core) LQW2BH LQW31H LQH31H LQH31M LQH32M General frequency range LQH43M(N) LQM18N Magnetically shielded multilayer LQM21N LQH31C LQH32C LQH43C LQM21D Chokes LQM21F LQM31F LQH55D LQH3KS LQH66S Winding
3.3 2.0 1.25 1.6 0.8 1.0 0.5
Inductance Range (H) 1n
1.0nH
Structure
(mm)
1.0 0.5
EIA Code 0402
10n
100n
1
10
100
1m
10m
120nH 1.2nH
Multilayer
1.6 0.8
0603
0.6nH
100nH
0.6 0.3
0201
1.0nH
27nH
1.0 0.5
0402
1.0nH
18nH
0402
1.3nH
33nH
1.6 0.8
0603
1.5nH
100nH
1.0 0.5
0402 0603 0805 1206 1206 1206 1210 1812 0603 0805 1206 1210 1812 0805 0805 1206 2220 1212
6.3
82nH
1.6 0.8
2.2nH
470nH
2.0 1.5
2.7nH
470nH
3.2 1.6
8.8nH
100nH
Winding (ferrite core)
3.2 1.6
54nH
880nH
3.2 1.6
0.15H
100H
Winding (ferrite core)
3.2 2.5 4.5 3.2
1.0H
560H
1.0H
2200H
47nH
2200nH
2.0 1.25
0.1H
4.7H
3.2 1.6 3.2 2.5 4.5 3.2
0.12H
100H
Winding
0.15H
560H
1.0H
470H
1.0H
47H
Magnetically shielded multilayer
2.0 1.25
1.0H
47H
3.2 1.6 5.7 5.0
10H 10000H 0.12H
Magnetically shielded Magnetically shielded
3.3
3.3H
2200H 10000H
6.3
2525
0.27H
CAUTION : Use rosin-based flux, but not strong acidic flux (with chlorine content exceeding 0.2wt%) when soldering chip coil. Do not use water-soluble flux.
4
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Selection Guide
Start
Operating Frequency
Less than 100MHz
Greater than 100MHz
Application
Choke
General
High Frequency
Wire Wound
1212
Multilayer
0805
Wire Wound
1206
Multilayer
0603
Wire Wound
0402
Film
0201
Multilayer
0402
LQH3KS_23/_53
3.3-2200H 20-320mA
1206
LQM21D
1.0-47H 7-60mA
0805
LQH31M
0.15-100H
1210
LQM18N
47-2200nH
0805
LQW15A
1.5-82nH
0603
LQP03T
0.6-27nH
0402
LQG15H
1.0-120nH
0603
LQH31C
0.12-100H 80-970mA
1210
LQM21F
1.0-47H 7-220mA
1206
LQH32M
1.0-560H
1812
LQM21N
0.1-4.7H
LQW18A
2.2-470nH
0805
LQP15T
1.0-18nH
0402
LQG18H
1.2-100nH
Dimensions in inches
LQH32C
(Standard type)
LQM31F
10H 70mA
LQH43M(N)
1.0-2200H
LQW2BH
2.7-470nH
1206
LQP15M
1.0-33nH
0603
0.15-560H 60-1450mA
1210
LQW31H LQH32C_53
(Low profile type)
LQP18M
1.3-100nH
8.8-100nH
1206
1.0-100H 100-1000mA
1812
LQH31H
54-880nH
LQH43C
1.0-470H 90-1080mA
2220
LQH55D
0.12-10000H 0.05-6.0A
2525
LQH66S
0.27-10000H 0.05-6.0A
5
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
1
Chip Coils
High Frequency Monolithic Type LQG15H/LQG18H Series
LQG15H Series
0.250.1 Polarity Marking
The LQG15H series are chip inductors specifically designed for high frequency applications. The LQG15H series is designed to realize stable characteristics in high frequency range applying integrated multilayer process. The integrated multilayer process enables a wide range of inductance values with tight tolerance.
1.00.05
0.50.05
s Features
1. High-Q, stable inductance in high frequency is achieved by the original structure that minimizes stray capacitance. It is suitable for the high frequency circuits of mobile communication equipment. 2. The small size of LQG15H (1.0x0.5x0.5mm) is suitable for small and low profile mobile equipment. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance.
(in mm)
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general
Inductance (nH) 1.0 0.3nH 1.1 0.3nH 1.2 0.3nH 1.3 0.3nH 1.5 0.3nH 1.6 0.3nH 1.8 0.3nH 2.0 0.3nH 2.2 0.3nH 2.4 0.3nH 2.7 0.3nH 3.0 0.3nH 3.3 0.3nH 3.6 0.3nH 3.9 0.3nH 4.3 0.3nH 4.7 0.3nH 5.1 0.3nH 5.6 0.3nH 6.2 0.3nH 6.8 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 DC Resistance (ohm) 0.10 max. 0.10 max. 0.10 max. 0.10 max. 0.10 max. 0.10 max. 0.10 max. 0.12 max. 0.15 max. 0.16 max. 0.17 max. 0.18 max. 0.19 max. 0.19 max. 0.19 max. 0.21 max. 0.23 max. 0.24 max. 0.26 max. 0.27 max. 0.29 max. Q (min.) 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 5300 min. 4300 min. 4200 min.
Part Number LQG15HN1N0S02 LQG15HN1N1S02 LQG15HN1N2S02 LQG15HN1N3S02 LQG15HN1N5S02 LQG15HN1N6S02 LQG15HN1N8S02 LQG15HN2N0S02 LQG15HN2N2S02 LQG15HN2N4S02 LQG15HN2N7S02 LQG15HN3N0S02 LQG15HN3N3S02 LQG15HN3N6S02 LQG15HN3N9S02 LQG15HN4N3S02 LQG15HN4N7S02 LQG15HN5N1S02 LQG15HN5N6S02 LQG15HN6N2S02 LQG15HN6N8J02
EIA 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402
Continued on the following page.
6
0.50.05
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQG15HN7N5J02 LQG15HN8N2J02 LQG15HN9N1J02 LQG15HN10NJ02 LQG15HN12NJ02 LQG15HN15NJ02 LQG15HN18NJ02 LQG15HN22NJ02 LQG15HN27NJ02 LQG15HN33NJ02 LQG15HN39NJ02 LQG15HN47NJ02 LQG15HN56NJ02 LQG15HN68NJ02 LQG15HN82NJ02 LQG15HNR10J02 LQG15HNR12J02 Inductance (nH) 7.5 5% 8.2 5% 9.1 5% 10 5% 12 5% 15 5% 18 5% 22 5% 27 5% 33 5% 39 5% 47 5% 56 5% 68 5% 82 5% 100 5% 120 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 300 300 300 300 300 300 300 300 300 300 200 200 200 180 150 150 150 DC Resistance (ohm) 0.31 max. 0.33 max. 0.34 max. 0.35 max. 0.41 max. 0.46 max. 0.51 max. 0.58 max. 0.67 max. 0.67 max. 1.06 max. 1.15 max. 1.20 max. 1.25 max. 1.60 max. 1.60 max. 1.60 max. Q (min.) 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self Resonance Frequency (MHz) 3900 min. 3600 min. 3400 min. 3200 min. 2800 min. 2300 min. 2100 min. 1800 min. 1600 min. 1500 min. 1200 min. 1000 min. 800 min. 800 min. 600 min. 600 min. 600 min. EIA 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402
1
Operating Temp. Range : -40C to 85C
s Q-Frequency Characteristics
100
s Inductance-Frequency Characteristics
1000
1.5nH 80 Inductance (nH) 100
120nH
68nH 33nH 12nH 4.7nH
60 Q 4.7nH 40 12nH 20 68nH 120nH 0 100 1000 Frequency (MHz) 10000 33nH
10
1.5nH 1 100 1000 Frequency (MHz) 10000
7
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
1
LQG18H Series
The LQG18H series is designed to realize stable characteristics in high frequency range applying integrated multilayer process.
0.30.2 Polarity Marking
s Features
1. High-Q, stable inductance in high frequency is available due to the original structure that minimizes stray capacitance. It is suitable for the high frequency circuits of small, handy equipment, especially for card size equipment. 2. Small size of LQG18H (1.6x0.8x0.8mm) is suitable for small, handy equipment, especially for card size equipment. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance.
1.60.15 0.80.15
(in mm)
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general
Inductance (nH) 1.2 0.3nH 1.5 0.3nH 1.8 0.3nH 2.2 0.3nH 2.7 0.3nH 3.3 0.3nH 3.9 0.3nH 4.7 0.3nH 5.6 0.3nH 6.8 5% 8.2 5% 10 5% 12 5% 15 5% 18 5% 22 5% 27 5% 33 5% 39 5% 47 5% 56 5% 68 5% 82 5% 100 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 DC Resistance (ohm) 0.10 max. 0.10 max. 0.10 max. 0.10 max. 0.15 max. 0.15 max. 0.15 max. 0.20 max. 0.20 max. 0.25 max. 0.25 max. 0.30 max. 0.35 max. 0.40 max. 0.45 max. 0.50 max. 0.55 max. 0.60 max. 0.65 max. 0.70 max. 0.75 max. 0.80 max. 0.85 max. 0.90 max. Q (min.) 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 5000 min. 5000 min. 4000 min. 3500 min. 3000 min. 2800 min. 2600 min. 2300 min. 2000 min. 1700 min. 1500 min. 1200 min. 1100 min. 1000 min. 900 min. 800 min.
Part Number LQG18HN1N2S00 LQG18HN1N5S00 LQG18HN1N8S00 LQG18HN2N2S00 LQG18HN2N7S00 LQG18HN3N3S00 LQG18HN3N9S00 LQG18HN4N7S00 LQG18HN5N6S00 LQG18HN6N8J00 LQG18HN8N2J00 LQG18HN10NJ00 LQG18HN12NJ00 LQG18HN15NJ00 LQG18HN18NJ00 LQG18HN22NJ00 LQG18HN27NJ00 LQG18HN33NJ00 LQG18HN39NJ00 LQG18HN47NJ00 LQG18HN56NJ00 LQG18HN68NJ00 LQG18HN82NJ00 LQG18HNR10J00
EIA 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
Operating Temp. Range : -40C to +85C
8
0.80.15
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Q-Frequency Characteristics
200
s Inductance-Frequency Characteristics
1000
1
160 3.3nH 120 Q Inductance (nH) 100
68nH 10nH
80
10 10nH 40 68nH 0 100 1 100 3.3nH
1000 Frequency (MHz)
10000
1000 Frequency (MHz)
10000
9
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
High Frequency Film Type LQP03T/LQP15T/LQP15M/LQP18M Series
2
LQP03T Series
Coloring side *Polarity Marking Inductance : 1.0-3.9nH0.1nH 4.3-10nH3% 18-27nH Coloring side
LQP03T series using Murata's original thin film technology contributes further to miniaturizing high performance equipment because the size is small and the Q-value is high.
0.600.05
0.300.05
Polarity Marking
s Features
1. Ultra small and thin size 0.6x0.3x0.3mm 2. High Q value in high frequency range 3. E24 step 0.6 to 3.9nH +-0.1nH 4.3 to 10nH +-3% 4. E12 step 0.6 to 3.9nH +-0.2nH 4.7 to 15nH +-5% 18 to 27nH +-3%, +-5% 5. Lead is not contained in the products.
0.300.05
0.150.05
(in mm)
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general
Inductance (nH) 0.6 0.1nH 0.6 0.2nH 0.7 0.1nH 0.8 0.1nH 0.8 0.2nH 0.9 0.1nH 1.0 0.1nH 1.0 0.2nH 1.1 0.1nH 1.2 0.1nH 1.2 0.2nH 1.3 0.1nH 1.5 0.1nH 1.5 0.2nH 1.6 0.1nH 1.8 0.1nH 1.8 0.2nH 2.0 0.1nH 2.2 0.1nH 2.2 0.2nH 2.4 0.1nH 2.7 0.1nH 2.7 0.2nH Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Rated Current (mA) 420 420 410 410 410 400 400 400 280 280 280 280 280 280 280 280 280 220 220 220 220 220 220 DC Resistance (ohm) 0.08 max. 0.08 max. 0.09 max. 0.09 max. 0.09 max. 0.10 max. 0.10 max. 0.10 max. 0.13 max. 0.13 max. 0.13 max. 0.16 max. 0.16 max. 0.16 max. 0.16 max. 0.16 max. 0.16 max. 0.18 max. 0.18 max. 0.18 max. 0.21 max. 0.21 max. 0.21 max. Q (min.) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min.
Part Number LQP03TN0N6B00 LQP03TN0N6C00 LQP03TN0N7B00 LQP03TN0N8B00 LQP03TN0N8C00 LQP03TN0N9B00 LQP03TN1N0B00 LQP03TN1N0C00 LQP03TN1N1B00 LQP03TN1N2B00 LQP03TN1N2C00 LQP03TN1N3B00 LQP03TN1N5B00 LQP03TN1N5C00 LQP03TN1N6B00 LQP03TN1N8B00 LQP03TN1N8C00 LQP03TN2N0B00 LQP03TN2N2B00 LQP03TN2N2C00 LQP03TN2N4B00 LQP03TN2N7B00 LQP03TN2N7C00
EIA 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201
Continued on the following page.
10
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQP03TN3N0B00 LQP03TN3N3B00 LQP03TN3N3C00 LQP03TN3N6B00 LQP03TN3N9B00 LQP03TN3N9C00 LQP03TN4N3H00 LQP03TN4N7H00 LQP03TN4N7J00 LQP03TN5N1H00 LQP03TN5N6H00 LQP03TN5N6J00 LQP03TN6N2H00 LQP03TN6N8H00 LQP03TN6N8J00 LQP03TN7N5H00 LQP03TN8N2H00 LQP03TN8N2J00 LQP03TN9N1H00 LQP03TN10NH00 LQP03TN10NJ00 LQP03TN12NJ00 LQP03TN15NJ00 LQP03TN18NH00 LQP03TN18NJ00 LQP03TN22NH00 LQP03TN22NJ00 LQP03TN27NH00 LQP03TN27NJ00 Inductance (nH) 3.0 0.1nH 3.3 0.1nH 3.3 0.2nH 3.6 0.1nH 3.9 0.1nH 3.9 0.2nH 4.3 3% 4.7 3% 4.7 5% 5.1 3% 5.6 3% 5.6 5% 6.2 3% 6.8 3% 6.8 5% 7.5 3% 8.2 3% 8.2 5% 9.1 3% 10 3% 10 5% 12 5% 15 5% 18 3% 18 5% 22 3% 22 5% 27 3% 27 5% Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Rated Current (mA) 190 190 190 170 170 170 160 160 160 140 140 140 130 130 130 110 110 110 100 100 100 90 90 80 80 70 70 70 70 DC Resistance (ohm) 0.30 max. 0.30 max. 0.30 max. 0.45 max. 0.45 max. 0.45 max. 0.55 max. 0.55 max. 0.55 max. 0.68 max. 0.68 max. 0.68 max. 0.75 max. 0.75 max. 0.75 max. 0.86 max. 0.86 max. 0.86 max. 1.10 max. 1.10 max. 1.10 max. 1.25 max. 1.50 max. 2.0 max. 2.0 max. 2.6 max. 2.6 max. 3.1 max. 3.1 max. Q (min.) 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 5500 min. 5500 min. 5500 min. 4500 min. 4500 min. 4500 min. 3700 min. 3300 min. 3100 min. 3100 min. 2800 min. 2800 min. 2500 min. 2500 min. EIA 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201 0201
2
Operating Temp. Range : -40C to +85C
s Q-Frequency Characteristics
E4991A 1.5nH 16197A
s Inductance-Frequency Characteristics
40 27nH E4991A 16197A
80
60 3.9nH Q 40 6.8nH 10nH 20 15nH 27nH 0 100 Inductance (nH)
30 15nH 20 10nH 10
6.8nH 3.9nH
1000 Frequency (MHz)
10000
0 100
1.5nH 1000 Frequency (MHz) 10000
Continued on the following page.
11
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
s Reference Data
E4991A & 16197A Part Number Inductance (nH) (Typ.) 800MHz 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.2 1.3 1.5 1.5 1.6 1.8 1.8 2.0 2.2 2.2 2.4 2.7 2.7 3.0 3.3 3.3 3.6 3.9 3.9 4.3 4.7 4.7 5.1 5.6 5.6 6.2 6.8 6.2 7.5 8.2 8.2 9.1 10 10 12 15 18 18 22 22 28 28 900MHz 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.2 1.3 1.5 1.5 1.6 1.8 1.8 2.0 2.2 2.2 2.4 2.7 2.7 3.0 3.3 3.3 3.6 3.9 3.9 4.3 4.7 4.7 5.1 5.6 5.6 6.2 6.8 6.2 7.5 8.2 8.2 9.1 10 10 12 15 18 18 23 23 29 29 1.8GHz 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.2 1.3 1.5 1.5 1.6 1.8 1.8 2.0 2.2 2.2 2.4 2.7 2.7 3.0 3.3 3.3 3.6 3.9 3.9 4.3 4.8 4.8 5.2 5.8 5.8 6.5 7.1 6.5 7.9 8.6 8.6 9.9 11 11 13 18 24 24 32 32 47 47 2.0GHz 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.2 1.3 1.5 1.5 1.6 1.8 1.8 2.0 2.2 2.2 2.4 2.7 2.7 3.0 3.3 3.3 3.7 4.0 4.0 4.4 4.9 4.9 5.3 5.9 5.9 6.6 7.4 6.6 8.2 9.1 9.1 10 12 12 14 19 2.4GHz 0.6 0.6 0.7 0.8 0.8 0.9 1.0 1.0 1.1 1.2 1.2 1.3 1.5 1.5 1.6 1.8 1.8 2.0 2.2 2.2 2.4 2.7 2.7 3.0 3.4 3.4 3.7 4.1 4.1 4.5 5.1 5.1 5.5 6.1 6.1 6.9 7.7 6.9 8.7 9.6 9.6 11 13 13 16 23 800MHz 50 min. 50 min. 50 min. 50 min. 50 min. 50 min. 50 min. 50 min. 50 min. 50 50 48 45 45 43 36 36 38 28 28 36 28 28 28 29 29 31 29 29 28 28 28 26 22 22 20 21 20 21 18 18 20 21 21 21 21 18 18 16 16 15 15 900MHz 54 min. 54 min. 54 min. 54 min. 54 min. 54 min. 54 min. 54 min. 54 min. 54 54 52 48 48 47 38 38 40 35 35 38 30 30 29 31 31 33 31 31 30 30 30 28 24 24 21 22 21 22 19 19 21 22 22 22 21 19 19 17 17 15 15 Q (Typ.) 1.8GHz 70 min. 70 min. 70 min. 70 min. 70 min. 70 min. 70 min. 70 min. 70 min. 70 70 67 63 63 57 50 50 52 49 49 50 40 40 39 42 42 43 41 41 40 40 40 37 32 32 27 29 27 28 25 25 26 28 28 27 25 20 20 16 16 13 13 2.0GHz 73 min. 73 min. 73 min. 73 min. 73 min. 73 min. 73 min. 73 min. 73 min. 73 73 72 66 66 64 53 53 54 52 52 53 42 42 41 43 43 45 43 43 42 42 42 39 33 33 28 30 28 30 25 25 26 28 28 27 24 2.4GHz 77 min. 77 min. 77 min. 77 min. 77 min. 77 min. 77 min. 77 min. 77 min. 77 77 74 69 69 67 55 55 57 54 54 56 44 44 43 45 45 47 45 45 44 43 43 40 33 33 28 30 28 29 24 24 25 27 27 25 22 -
2
LQP03TN0N6B00 LQP03TN0N6C00 LQP03TN0N7B00 LQP03TN0N8B00 LQP03TN0N8C00 LQP03TN0N9B00 LQP03TN1N0B00 LQP03TN1N0C00 LQP03TN1N1B00 LQP03TN1N2B00 LQP03TN1N2C00 LQP03TN1N3B00 LQP03TN1N5B00 LQP03TN1N5C00 LQP03TN1N6B00 LQP03TN1N8B00 LQP03TN1N8C00 LQP03TN2N0B00 LQP03TN2N2B00 LQP03TN2N2C00 LQP03TN2N4B00 LQP03TN2N7B00 LQP03TN2N7C00 LQP03TN3N0B00 LQP03TN3N3B00 LQP03TN3N3C00 LQP03TN3N6B00 LQP03TN3N9B00 LQP03TN3N9C00 LQP03TN4N3H00 LQP03TN4N7H00 LQP03TN4N7J00 LQP03TN5N1H00 LQP03TN5N6H00 LQP03TN5N6J00 LQP03TN6N2H00 LQP03TN6N8H00 LQP03TN6N8J00 LQP03TN7N5H00 LQP03TN8N2H00 LQP03TN8N2J00 LQP03TN9N1H00 LQP03TN10NH00 LQP03TN10NJ00 LQP03TN12NJ00 LQP03TN15NJ00 LQP03TN18NH00 LQP03TN18NJ00 LQP03TN22NH00 LQP03TN22NJ00 LQP03TN27NH00 LQP03TN27NJ00
12
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQP15T Series
Polarity Marking
The LQP15T series offers High Q value, tight inductance tolerance with small/thin package using Murata's original film engineering technology.
1.000.05
0.500.05
2
1. High Q value 2. Tight inductance tolerance (+-0.1nH, +-0.2nH, +-3%) 3. Ultra small and tight size (1005size, Height 0.4mm) 4. Low DC resistance 5. Lead is not contained in the products.
0.250.1
0.400.05
s Features
(in mm)
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general
Inductance (nH) 1.0 0.1nH 1.0 0.2nH 1.1 0.1nH 1.1 0.2nH 1.2 0.1nH 1.2 0.2nH 1.3 0.1nH 1.3 0.2nH 1.5 0.1nH 1.5 0.2nH 1.6 0.1nH 1.6 0.2nH 1.8 0.1nH 1.8 0.2nH 2.0 0.2nH 2.2 0.2nH 2.4 0.2nH 2.7 0.2nH 3.0 0.2nH 3.3 0.2nH 3.6 0.2nH 3.9 0.2nH 4.7 0.2nH 5.6 0.2nH 6.8 3% 8.2 3% 10 3% 12 3% 15 3% 18 3% Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Rated Current (mA) 300 300 300 300 300 300 300 300 300 300 250 250 250 250 220 220 220 220 190 190 170 170 160 140 130 110 100 90 90 80 DC Resistance (ohm) 0.1 max. 0.1 max. 0.1 max. 0.1 max. 0.1 max. 0.1 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.15 max. 0.2 max. 0.2 max. 0.2 max. 0.2 max. 0.3 max. 0.3 max. 0.4 max. 0.4 max. 0.5 max. 0.6 max. 0.7 max. 0.8 max. 1.0 max. 1.0 max. 1.3 max. 1.5 max. Q (min.) 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 5500 min. 5500 min. 5500 min. 5500 min. 5000 min. 4500 min. 3500 min. 3000 min. 2500 min. 2500 min. 2000 min. 1500 min.
Part Number LQP15TN1N0B02 LQP15TN1N0C02 LQP15TN1N1B02 LQP15TN1N1C02 LQP15TN1N2B02 LQP15TN1N2C02 LQP15TN1N3B02 LQP15TN1N3C02 LQP15TN1N5B02 LQP15TN1N5C02 LQP15TN1N6B02 LQP15TN1N6C02 LQP15TN1N8B02 LQP15TN1N8C02 LQP15TN2N0C02 LQP15TN2N2C02 LQP15TN2N4C02 LQP15TN2N7C02 LQP15TN3N0C02 LQP15TN3N3C02 LQP15TN3N6C02 LQP15TN3N9C02 LQP15TN4N7C02 LQP15TN5N6C02 LQP15TN6N8H02 LQP15TN8N2H02 LQP15TN10NH02 LQP15TN12NH02 LQP15TN15NH02 LQP15TN18NH02
EIA 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402
Operating Temp. Range : -40C to +85C
13
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Q-Frequency Characteristics
80
s Inductance-Frequency Characteristics
50
2
Q
60
2.0nH Inductance (nH) 3.9nH 8.2nH
40
18nH
30
40 12nH 18nH 20
20
12nH
10
8.2nH 3.9nH 2.0nH
0 10 100 Frequency (MHz) 1000 10000
0 10 100 Frequency (MHz) 1000 10000
14
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQP15M Series
1. Tight inductance tolerance (+-0.05nH, +-0.1nH, +-2%) realized by Murata's original film technology. Various inductance values enable assembly with no tuning. 2. Ultra small 1005size inductor which is low profile and lightest weight in the world enables miniaturizing of mobile telecommunication equipment. LQP15M series weights 0.6mg/pcs. while multilayer type inductor 0.9mg/pcs. 3. High Q at high frequency range. 4. High self resonant frequency due to low stray capacitance and narrow inductance distribution provides stable inductance in high frequency circuits such as telecommunication equipment.
0.50.1
s Features
1.00.1
2
0.250.1
0.350.1
(in mm)
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general
Inductance (nH) 1.0 0.1nH 1.0 0.05nH 1.1 0.1nH 1.1 0.05nH 1.2 0.1nH 1.2 0.05nH 1.3 0.1nH 1.3 0.05nH 1.4 0.05nH 1.5 0.1nH 1.5 0.05nH 1.6 0.1nH 1.6 0.05nH 1.7 0.05nH 1.8 0.1nH 1.8 0.05nH 1.9 0.05nH 2.0 0.1nH 2.0 0.05nH 2.1 0.05nH 2.2 0.1nH 2.2 0.05nH 2.3 0.05nH 2.4 0.1nH 2.4 0.05nH 2.5 0.05nH 2.6 0.05nH 2.7 0.1nH 2.7 0.05nH 2.8 0.05nH Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Rated Current (mA) 400 400 390 390 390 390 280 280 280 280 280 220 220 280 280 280 220 220 220 220 220 220 220 220 220 220 220 220 220 190 DC Resistance (ohm) 0.1 max. 0.1 max. 0.1 max. 0.1 max. 0.1 max. 0.1 max. 0.2 max. 0.2 max. 0.2 max. 0.2 max. 0.2 max. 0.3 max. 0.3 max. 0.2 max. 0.2 max. 0.2 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.3 max. 0.4 max. Q (min.) 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min.
Part Number LQP15MN1N0B02 LQP15MN1N0W02 LQP15MN1N1B02 LQP15MN1N1W02 LQP15MN1N2B02 LQP15MN1N2W02 LQP15MN1N3B02 LQP15MN1N3W02 LQP15MN1N4W02 LQP15MN1N5B02 LQP15MN1N5W02 LQP15MN1N6B02 LQP15MN1N6W02 LQP15MN1N7W02 LQP15MN1N8B02 LQP15MN1N8W02 LQP15MN1N9W02 LQP15MN2N0B02 LQP15MN2N0W02 LQP15MN2N1W02 LQP15MN2N2B02 LQP15MN2N2W02 LQP15MN2N3W02 LQP15MN2N4B02 LQP15MN2N4W02 LQP15MN2N5W02 LQP15MN2N6W02 LQP15MN2N7B02 LQP15MN2N7W02 LQP15MN2N8W02
EIA 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402
Continued on the following page.
15
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQP15MN2N9W02 LQP15MN3N0B02 LQP15MN3N0W02 LQP15MN3N1W02 LQP15MN3N2W02 LQP15MN3N3B02 LQP15MN3N3W02 LQP15MN3N4W02 LQP15MN3N5W02 LQP15MN3N6B02 LQP15MN3N6W02 LQP15MN3N7W02 LQP15MN3N8W02 LQP15MN3N9B02 LQP15MN3N9W02 LQP15MN4N3B02 LQP15MN4N7B02 LQP15MN5N1B02 LQP15MN5N6B02 LQP15MN6N2B02 LQP15MN6N8B02 LQP15MN7N5B02 LQP15MN8N2B02 LQP15MN9N1B02 LQP15MN10NG02 LQP15MN12NG02 LQP15MN15NG02 LQP15MN18NG02 LQP15MN22NG02 LQP15MN27NG02 LQP15MN33NG02 Inductance (nH) 2.9 0.05nH 3.0 0.1nH 3.0 0.05nH 3.1 0.05nH 3.2 0.05nH 3.3 0.1nH 3.3 0.05nH 3.4 0.05nH 3.5 0.05nH 3.6 0.1nH 3.6 0.05nH 3.7 0.05nH 3.8 0.05nH 3.9 0.1nH 3.9 0.05nH 4.3 0.1nH 4.7 0.1nH 5.1 0.1nH 5.6 0.1nH 6.2 0.1nH 6.8 0.1nH 7.5 0.1nH 8.2 0.1nH 9.1 0.1nH 10 2% 12 2% 15 2% 18 2% 22 2% 27 2% 33 2% Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Rated Current (mA) 190 190 190 190 190 190 190 170 170 170 170 170 170 170 170 160 160 140 140 130 130 110 110 100 100 90 90 80 70 70 60 DC Resistance (ohm) 0.4 max. 0.4 max. 0.4 max. 0.4 max. 0.4 max. 0.4 max. 0.4 max. 0.5 max. 0.5 max. 0.5 max. 0.5 max. 0.5 max. 0.5 max. 0.5 max. 0.5 max. 0.6 max. 0.6 max. 0.7 max. 0.7 max. 0.9 max. 0.9 max. 1.1 max. 1.1 max. 1.3 max. 1.3 max. 1.6 max. 1.8 max. 2.0 max. 2.6 max. 3.1 max. 3.8 max. Q (min.) 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 5500 min. 5500 min. 4500 min. 4500 min. 3700 min. 3300 min. 3100 min. 2800 min. 2500 min. 2100 min. EIA 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402
2
Operating Temp. Range : -40C to +85C
s Q-Frequency Characteristics
100
s Inductance-Frequency Characteristics
100 33nH
80 Inductance (nH) 2.2nH 60
15nH 10
Q
4.7nH 40 8.2nH 20 15nH 33nH 0 100
8.2nH
4.7nH
2.2nH 1
1000 Frequency (MHz)
10000
100
1000 Frequency (MHz)
10000
16
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQP18M Series
1. Tight inductance tolerance (+-0.2nH, +-2%) realized by Murata's original film technology. Various inductance values enable assembly with no tuning. 2. Small size of LQP18M series is suitable for small hand held equipment, especially for card size equipment. 3. High Q at high frequency range. 4. High self resonant frequency due to low stray capacitance and narrow inductance distribution provides stable inductance in high frequency circuits such as telecommunication equipment. 5. LQP18M_02: Does not contain lead.
0.80.15
s Features
1.60.15
2
0.2 min.
0.50.1
(in mm)
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general
Inductance (nH) 1.3 0.2nH 1.5 0.2nH 1.8 0.2nH 2.2 0.2nH 2.7 0.2nH 3.3 0.2nH 3.9 0.2nH 4.7 0.2nH 5.6 0.2nH 6.8 0.2nH 8.2 0.2nH 10 2% 12 2% 15 2% 18 2% 22 2% 27 2% 33 2% 39 2% 47 2% 56 2% 68 2% 82 2% 100 2% Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 300 300 300 300 300 Rated Current (mA) 300 300 250 250 250 250 200 200 200 200 150 150 150 150 100 100 100 100 100 100 50 50 50 50 DC Resistance (ohm) 0.3 max. 0.3 max. 0.4 max. 0.4 max. 0.4 max. 0.4 max. 0.5 max. 0.5 max. 0.6 max. 0.7 max. 0.8 max. 1.0 max. 1.0 max. 1.3 max. 1.5 max. 1.9 max. 2.4 max. 2.8 max. 2.8 max. 2.2 max. 3.4 max. 3.5 max. 4.6 max. 6.1 max. Q (min.) 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 17 Test Frequency (MHz) 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 500 300 300 300 300 300 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 5900 min. 5200 min. 4700 min. 4300 min. 3600 min. 3400 min. 3000 min. 2700 min. 2300 min. 2100 min. 1900 min. 1700 min. 1400 min. 1200 min. 1000 min. 900 min. 800 min. 700 min.
Part Number LQP18MN1N3C02 LQP18MN1N5C02 LQP18MN1N8C02 LQP18MN2N2C02 LQP18MN2N7C02 LQP18MN3N3C02 LQP18MN3N9C02 LQP18MN4N7C02 LQP18MN5N6C02 LQP18MN6N8C02 LQP18MN8N2C02 LQP18MN10NG02 LQP18MN12NG02 LQP18MN15NG02 LQP18MN18NG02 LQP18MN22NG02 LQP18MN27NG02 LQP18MN33NG02 LQP18MN39NG02 LQP18MN47NG02 LQP18MN56NG02 LQP18MN68NG02 LQP18MN82NG02 LQP18MNR10G02
EIA 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
Operating Temp. Range : -40C to +85C
17
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Q-Frequency Characteristics
200 1.5nH
s Inductance-Frequency Characteristics
1000 100nH 68nH 33nH 100 15nH
2
Q
160
120 3.3nH 80
Inductance (nH)
6.8nH
10 3.3nH
6.8nH 40 33nH 0 100 100nH 1000 Frequency (MHz) 68nH 10000 15nH 1 100 1.5nH 1000 Frequency (MHz) 10000
18
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
High Frequency Winding Type LQW15A/LQW18A Series
LQW15A Series
The LQW15A series consists of air core chip coil using a miniature alumina core. The tight inductance tolerance (+-0.2nH, +-3%) is available due to Murata's original winding technology. The LQW15A series has high Q value in high frequency range and high self resonant frequency. It is suitable for high frequency circuits which are used in telecommunication equipment.
0.50.1
3
W 0.100.05 (in mm)
1.00.1
s Features
1. Horizontal winding structure enables tight inductance tolerance (+-0.2nH, +-3%) 2. The subminiature dimensions (1.0x0.5mm) allow high density mounting. 3. The high self resonant frequency realizes high Q value and stable inductance at high frequency. 4. Low DC resistance design is ideal for low loss, high output and low power consumption. 5. Resin-coated surface enables excellent mounting.
0.20.1
0.20.1
W: 0.60.1 (1.5-22nH), 0.5 0.1 (27-82nH)
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general
Inductance (nH) 1.5 0.2nH 1.5 0.5nH 2.7 0.2nH 2.7 0.5nH 3.9 0.2nH 3.9 0.5nH 4.3 0.2nH 4.3 0.5nH 4.7 0.2nH 4.7 0.5nH 5.1 0.2nH 5.1 0.5nH 6.2 0.2nH 6.2 0.5nH 6.8 3% 6.8 5% 7.5 3% 7.5 5% 8.2 3% 8.2 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 1000 1000 850 850 750 750 750 750 750 750 600 600 700 700 700 700 570 570 540 540 DC Resistance (ohm) 0.03 max. 0.03 max. 0.05 max. 0.05 max. 0.07 max. 0.07 max. 0.07 max. 0.07 max. 0.07 max. 0.07 max. 0.12 max. 0.12 max. 0.09 max. 0.09 max. 0.09 max. 0.09 max. 0.13 max. 0.13 max. 0.14 max. 0.14 max. Q (min.) 10 10 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 Test Frequency (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Self Resonance Frequency (GHz) 18.0 min. 18.0 min. 15.0 min. 15.0 min. 10.0 min. 10.0 min. 10.0 min. 10.0 min. 8.0 min. 8.0 min. 8.0 min. 8.0 min. 8.0 min. 8.0 min. 6.0 min. 6.0 min. 6.0 min. 6.0 min. 5.5 min. 5.5 min.
Part Number LQW15AN1N5C00 LQW15AN1N5D00 LQW15AN2N7C00 LQW15AN2N7D00 LQW15AN3N9C00 LQW15AN3N9D00 LQW15AN4N3C00 LQW15AN4N3D00 LQW15AN4N7C00 LQW15AN4N7D00 LQW15AN5N1C00 LQW15AN5N1D00 LQW15AN6N2C00 LQW15AN6N2D00 LQW15AN6N8H00 LQW15AN6N8J00 LQW15AN7N5H00 LQW15AN7N5J00 LQW15AN8N2H00 LQW15AN8N2J00
EIA 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402
Continued on the following page.
19
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQW15AN9N1H00 LQW15AN9N1J00 LQW15AN10NH00 LQW15AN10NJ00 LQW15AN12NH00 LQW15AN12NJ00 Inductance (nH) 9.1 3% 9.1 5% 10 3% 10 5% 12 3% 12 5% 15 3% 15 5% 18 3% 18 5% 22 3% 22 5% 27 3% 27 5% 33 3% 33 5% 39 3% 39 5% 47 3% 47 5% 56 3% 56 5% 68 5% 82 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 540 540 500 500 500 500 460 460 370 370 310 310 280 280 260 260 250 250 210 210 200 200 140 130 DC Resistance (ohm) 0.14 max. 0.14 max. 0.17 max. 0.17 max. 0.14 max. 0.14 max. 0.16 max. 0.16 max. 0.27 max. 0.27 max. 0.30 max. 0.30 max. 0.52 max. 0.52 max. 0.63 max. 0.63 max. 0.70 max. 0.70 max. 1.08 max. 1.08 max. 1.17 max. 1.17 max. 1.96 max. 2.24 max. Q (min.) 25 25 25 25 30 30 30 30 25 25 25 25 25 25 25 25 25 25 25 25 25 25 20 20 Test Frequency (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 200 200 150 Self Resonance Frequency (GHz) 5.5 min. 5.5 min. 5.5 min. 5.5 min. 5.5 min. 5.5 min. 5.0 min. 5.0 min. 4.5 min. 4.5 min. 4.0 min. 4.0 min. 3.5 min. 3.5 min. 3.2 min. 3.2 min. 3.0 min. 3.0 min. 2.9 min. 2.9 min. 2.8 min. 2.8 min. 2.5 min. 2.3 min. EIA 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402 0402
3
LQW15AN15NH00 LQW15AN15NJ00 LQW15AN18NH00 LQW15AN18NJ00 LQW15AN22NH00 LQW15AN22NJ00 LQW15AN27NH00 LQW15AN27NJ00 LQW15AN33NH00 LQW15AN33NJ00 LQW15AN39NH00 LQW15AN39NJ00 LQW15AN47NH00 LQW15AN47NJ00 LQW15AN56NH00 LQW15AN56NJ00 LQW15AN68NJ00 LQW15AN82NJ00
Operating Temp. Range : -55C to 125C
s Q-Frequency Characteristics
100
s Inductance-Frequency Characteristics
140 80 4.7nH 10nH 27nH Inductance (nH) 120 100 80 56nH 60 40 20 20 0 10 100 Frequency (MHz) 1000 10000 0 10 27nH 10nH 4.7nH 100 Frequency (MHz) 1000 10000 82nH
60 Q 40
56nH 82nH
20
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Features LQW18A_00 (Standard type)
1. Broad range of inductance (2.2nH to 470nH) with E24 step line up. 2. Horizontal winding structure enables tight inductance tolerance (+-0.2nH, +-2%). Stable circuit operation is possible. 3. The subminiature dimensions (1.6x0.8mm) allow high density mounting. 4. The high self resonant frequency realizes high Q value and stable inductance at high frequency. 5. Low DC resistance design is ideal for low loss, high output and low power consumption. 6. Resin-coated surface enables excellent mounting.
0.80.2
*1 LQW18AN_10 : 0.80.3
0.20.1
1.60.2
*1 0.80.2
0.4max
3
0.30.1 0.30.1 in mm
s Applications
1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. Bluetooth 4. W-LAN 5. High frequency circuits in general
s Features LQW18A_10 (High Q/Low DC Resistance type)
Lower DC Resistance approximately by 50% than current type. Higher Q by 10%, higher rated current by 20%.
s Applications
Cellular phone and Base station W-CDMA, GSM, N-CDMA, PDC Higher Q -- Matching circuit for antenna, SAW filter Lower Rdc -- Choke coil for IF, RF circuit like PA Equipment with high frequency circuits (Wireless LAN, etc.)
LQW18A_00 Series
Part Number LQW18AN2N2D00 LQW18AN3N6C00 LQW18AN3N6D00 LQW18AN3N9C00 LQW18AN3N9D00 LQW18AN4N3C00 LQW18AN4N3D00 LQW18AN4N7D00 LQW18AN5N6C00 LQW18AN5N6D00 LQW18AN6N2C00 LQW18AN6N2D00 LQW18AN6N8C00 LQW18AN6N8D00 LQW18AN7N5D00 LQW18AN8N2D00 LQW18AN8N7D00 LQW18AN9N1D00 LQW18AN9N5D00 LQW18AN10NG00 Inductance (nH) 2.2 0.5nH 3.6 0.2nH 3.6 0.5nH 3.9 0.2nH 3.9 0.5nH 4.3 0.2nH 4.3 0.5nH 4.7 0.5nH 5.6 0.2nH 5.6 0.5nH 6.2 0.2nH 6.2 0.5nH 6.8 0.2nH 6.8 0.5nH 7.5 0.5nH 8.2 0.5nH 8.7 0.5nH 9.1 0.5nH 9.5 0.5nH 10 2% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 700 850 850 850 850 850 850 850 750 750 750 750 750 750 750 650 650 650 650 650 DC Resistance (ohm) 0.049 max. 0.059 max. 0.059 max. 0.059 max. 0.059 max. 0.059 max. 0.059 max. 0.059 max. 0.082 max. 0.082 max. 0.082 max. 0.082 max. 0.082 max. 0.082 max. 0.082 max. 0.11 max. 0.11 max. 0.11 max. 0.11 max. 0.11 max. Q (min.) 16 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 Test Frequency (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. EIA 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
Continued on the following page.
21
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQW18AN10NJ00 LQW18AN11NG00 LQW18AN11NJ00 LQW18AN12NG00 LQW18AN12NJ00 LQW18AN13NG00 Inductance (nH) 10 5% 11 2% 11 5% 12 2% 12 5% 13 2% 13 5% 15 2% 15 5% 16 2% 16 5% 18 2% 18 5% 20 2% 20 5% 22 2% 22 5% 24 2% 24 5% 27 2% 27 5% 30 2% 30 5% 33 2% 33 5% 36 2% 36 5% 39 2% 39 5% 43 2% 43 5% 47 2% 47 5% 51 2% 51 5% 56 2% 56 5% 62 2% 62 5% 68 2% 68 5% 72 2% 72 5% 75 2% 75 5% 82 2% 82 5% 91 2% 91 5% 100 2% 100 5% 110 2% 110 5% 120 2% 120 5% 130 2% 130 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 650 650 650 600 600 600 600 600 600 550 550 550 550 550 550 500 500 500 500 440 440 420 420 420 420 400 400 400 400 380 380 380 380 370 370 360 360 280 280 340 340 270 270 270 270 250 250 230 230 220 220 200 200 180 180 170 170 DC Resistance (ohm) 0.11 max. 0.11 max. 0.11 max. 0.13 max. 0.13 max. 0.13 max. 0.13 max. 0.13 max. 0.13 max. 0.16 max. 0.16 max. 0.16 max. 0.16 max. 0.16 max. 0.16 max. 0.17 max. 0.17 max. 0.21 max. 0.21 max. 0.21 max. 0.21 max. 0.23 max. 0.23 max. 0.23 max. 0.23 max. 0.26 max. 0.26 max. 0.26 max. 0.26 max. 0.29 max. 0.29 max. 0.29 max. 0.29 max. 0.33 max. 0.33 max. 0.35 max. 0.35 max. 0.51 max. 0.51 max. 0.38 max. 0.38 max. 0.56 max. 0.56 max. 0.56 max. 0.56 max. 0.60 max. 0.60 max. 0.64 max. 0.64 max. 0.68 max. 0.68 max. 1.2 max. 1.2 max. 1.3 max. 1.3 max. 1.4 max. 1.4 max. Q (min.) 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 38 38 38 38 38 38 38 38 38 38 34 34 34 34 34 34 34 34 34 34 32 32 32 32 32 32 Test Frequency (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 200 200 200 200 200 200 200 200 200 200 200 200 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 6000 min. 5500 min. 5500 min. 5500 min. 5500 min. 4900 min. 4900 min. 4600 min. 4600 min. 3800 min. 3800 min. 3700 min. 3700 min. 3300 min. 3300 min. 3200 min. 3200 min. 2900 min. 2900 min. 2800 min. 2800 min. 2700 min. 2700 min. 2600 min. 2600 min. 2500 min. 2500 min. 2400 min. 2400 min. 2300 min. 2300 min. 2200 min. 2200 min. 2100 min. 2100 min. 2050 min. 2050 min. 2000 min. 2000 min. 1900 min. 1900 min. 1800 min. 1800 min. 1350 min. 1350 min. 1600 min. 1600 min. 1450 min. 1450 min. EIA 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
3
LQW18AN13NJ00 LQW18AN15NG00 LQW18AN15NJ00 LQW18AN16NG00 LQW18AN16NJ00 LQW18AN18NG00 LQW18AN18NJ00 LQW18AN20NG00 LQW18AN20NJ00 LQW18AN22NG00 LQW18AN22NJ00 LQW18AN24NG00 LQW18AN24NJ00 LQW18AN27NG00 LQW18AN27NJ00 LQW18AN30NG00 LQW18AN30NJ00 LQW18AN33NG00 LQW18AN33NJ00 LQW18AN36NG00 LQW18AN36NJ00 LQW18AN39NG00 LQW18AN39NJ00 LQW18AN43NG00 LQW18AN43NJ00 LQW18AN47NG00 LQW18AN47NJ00 LQW18AN51NG00 LQW18AN51NJ00 LQW18AN56NG00 LQW18AN56NJ00 LQW18AN62NG00 LQW18AN62NJ00 LQW18AN68NG00 LQW18AN68NJ00 LQW18AN72NG00 LQW18AN72NJ00 LQW18AN75NG00 LQW18AN75NJ00 LQW18AN82NG00 LQW18AN82NJ00 LQW18AN91NG00 LQW18AN91NJ00 LQW18ANR10G00 LQW18ANR10J00 LQW18ANR11G00 LQW18ANR11J00 LQW18ANR12G00 LQW18ANR12J00 LQW18ANR13G00 LQW18ANR13J00
Continued on the following page.
22
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQW18ANR15G00 LQW18ANR15J00 LQW18ANR16G00 LQW18ANR16J00 LQW18ANR18G00 LQW18ANR18J00 LQW18ANR20G00 LQW18ANR20J00 LQW18ANR22G00 LQW18ANR22J00 LQW18ANR27G00 LQW18ANR27J00 LQW18ANR33G00 LQW18ANR33J00 LQW18ANR39G00 LQW18ANR39J00 LQW18ANR47G00 LQW18ANR47J00 Inductance (nH) 150 2% 150 5% 160 2% 160 5% 180 2% 180 5% 200 2% 200 5% 220 2% 220 5% 270 2% 270 5% 330 2% 330 5% 390 2% 390 5% 470 2% 470 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 160 160 150 150 140 140 120 120 120 120 110 110 85 85 80 80 75 75 DC Resistance (ohm) 1.5 max. 1.5 max. 2.1 max. 2.1 max. 2.2 max. 2.2 max. 2.4 max. 2.4 max. 2.5 max. 2.5 max. 3.4 max. 3.4 max. 5.5 max. 5.5 max. 6.2 max. 6.2 max. 7.0 max. 7.0 max. Q (min.) 32 32 32 32 25 25 25 25 25 25 30 30 30 30 30 30 30 30 Test Frequency (MHz) 150 150 150 150 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Self Resonance Frequency (MHz) 1400 min. 1400 min. 1350 min. 1350 min. 1300 min. 1300 min. 1250 min. 1250 min. 1200 min. 1200 min. 960 min. 960 min. 800 min. 800 min. 800 min. 800 min. 700 min. 700 min. EIA 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
3
Operating Temp. Range : -25C to 85C
s Q-Frequency Characteristics
120
s Inductance-Frequency Characteristics
10000 8.7nH 470nH 220nH 1000 Inductance(nH)
100
20nH
80 47nH Q 60 100nH
100nH 100 47nH 20nH 10 8.7nH
40
20 470nH 0 10 220nH 10000 1 10 100 1000 Frequency (MHz) 10000
100 Frequency (MHz)
1000
23
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQW18A_10 Series (High Q/Low DC Resistance Type)
Part Number LQW18AN2N2D10 LQW18AN3N9C10 LQW18AN3N9D10 Inductance (nH) 2.2 0.5nH 3.9 0.2nH 3.9 0.5nH 5.6 0.5nH 6.8 0.2nH 6.8 0.5nH 8.2 0.5nH 10 2% 10 5% 12 2% 12 5% 15 5% 18 2% 18 5% 22 2% 22 5% 27 2% 27 5% 33 5% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 1400 1000 1000 900 900 900 800 800 800 750 750 700 700 700 640 640 590 590 550 DC Resistance (ohm) 0.018 max. 0.032 max. 0.032 max. 0.045 max. 0.045 max. 0.045 max. 0.058 max. 0.058 max. 0.058 max. 0.071 max. 0.071 max. 0.085 max. 0.085 max. 0.085 max. 0.099 max. 0.099 max. 0.116 max. 0.116 max. 0.132 max. Q (min.) 25 38 38 38 38 38 38 38 38 38 38 42 42 42 42 42 42 42 42 Test Frequency (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Self Resonance Frequency (MHz) 18000 min. 11000 min. 11000 min. 10000 min. 7000 min. 7000 min. 7000 min. 5000 min. 5000 min. 5000 min. 5000 min. 4500 min. 3500 min. 3500 min. 3200 min. 3200 min. 2800 min. 2800 min. 2500 min. EIA 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
3
LQW18AN5N6D10 LQW18AN6N8C10 LQW18AN6N8D10 LQW18AN8N2D10 LQW18AN10NG10 LQW18AN10NJ10 LQW18AN12NG10 LQW18AN12NJ10 LQW18AN15NJ10 LQW18AN18NG10 LQW18AN18NJ10 LQW18AN22NG10 LQW18AN22NJ10 LQW18AN27NG10 LQW18AN27NJ10 LQW18AN33NJ10
Operating Temp. Range : -25C to 85C
s Q-Frequency Characteristics
200 2.2nH
s Inductance-Frequency Characteristics
100 33nH
Inductance(nH)
10nH
10nH 10
Q
100 33nH
2.2nH
0 10
1 100 frequency(MHz) 1000 10000 10 100 frequency(MHz) 1000 10000
24
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
High Frequency Winding Type LQW2BH/LQW31H Series
1.50.2 1.50.2
s Features
1. Inductance range from 2.7 to 470nH 2. Their high self-resonant frequency characteristic yields a high Q value and highly stable inductance at high frequencies. 3. Low DC resistance design enables handling of higher rated current. 4. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. 5. LQW2BHN_D/_J/_K Inductance tolerance +-0.5nH (8.2nH max.), +-5% (10 to 220nH), +-10% (270nH to 470nH) is realized. The sub miniature dimensions (2.0x1.5mm) allow high density mounting. LQW2BHN_G (Tight inductance tolerance) Tight inductance tolerance of +-2% is available. LQW2BHN_13 (High Q/Low DC Resistance Type) LQW2BHN_13 using thick wire (0.12mm in diameter) has higher Q value than existing LQW2BH series. Low DC resistance design enables handling of higher current. Inductance range from 2.7 to 27nH. 6. Does not contain lead.
2.00.2 1.50.2
1.7 -0.1
+0.08
LQW2BH series consists of air-core chip coil using a sub-miniature alumina core as a bobbin.
4
0.5 min. 0.5 min.
0.5 min. (in mm)
s Applications
High frequency circuit in telecommunication equipment, such as DECT, PHS, PCS, PCN, GSM and CDMA Impedance Matching -- Power-AMP Module (PA) SAW filter Resonance circuits -- VCO
LQW2BH_03 Series
Part Number LQW2BHN3N3D03 LQW2BHN6N8D03 LQW2BHN8N2D03 LQW2BHN10NJ03 LQW2BHN12NJ03 LQW2BHN15NJ03 LQW2BHN18NJ03 LQW2BHN22NJ03 LQW2BHN27NJ03 LQW2BHN33NG03 LQW2BHN33NJ03 LQW2BHN39NG03 LQW2BHN39NJ03 LQW2BHN47NG03 Inductance (nH) 3.3 0.5nH 6.8 0.5nH 8.2 0.5nH 10 5% 12 5% 15 5% 18 5% 22 5% 27 5% 33 2% 33 5% 39 2% 39 5% 47 2% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 910 680 630 1320 680 630 690 720 540 570 570 730 730 450 DC Resistance (ohm) 0.05 max. 0.11 max. 0.12 max. 0.03 max. 0.11 max. 0.12 max. 0.10 max. 0.09 max. 0.17 max. 0.15 max. 0.15 max. 0.09 max. 0.09 max. 0.23 max. Q (min.) 10 20 20 30 30 30 30 30 40 40 40 40 40 40 Test Frequency (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 250 200 Self Resonance Frequency (MHz) 6000 min. 5400 min. 3900 min. 3300 min. 3200 min. 2700 min. 2600 min. 2100 min. 2300 min. 1900 min. 1900 min. 1700 min. 1700 min. 1600 min. EIA 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805
Continued on the following page.
25
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQW2BHN47NJ03 LQW2BHN56NG03 LQW2BHN56NJ03 LQW2BHN68NG03 LQW2BHN68NJ03 LQW2BHN82NG03 LQW2BHN82NJ03 LQW2BHNR10G03 LQW2BHNR10J03 LQW2BHNR12G03 Inductance (nH) 47 5% 56 2% 56 5% 68 2% 68 5% 82 2% 82 5% 100 2% 100 5% 120 2% 120 5% 150 2% 150 5% 180 2% 180 5% 220 2% 220 5% 270 5% 270 10% 330 5% 330 10% 390 5% 390 10% 470 5% 470 10% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 10 10 10 10 10 10 10 10 Rated Current (mA) 450 430 430 460 460 320 320 270 350 320 320 260 390 250 250 240 240 190 190 180 180 170 170 160 160 DC Resistance (ohm) 0.23 max. 0.26 max. 0.26 max. 0.23 max. 0.23 max. 0.42 max. 0.42 max. 0.55 max. 0.38 max. 0.40 max. 0.40 max. 0.68 max. 0.47 max. 0.71 max. 0.71 max. 0.70 max. 0.70 max. 2.00 max. 2.00 max. 2.20 max. 2.20 max. 2.50 max. 2.50 max. 2.80 max. 2.80 max. Q (min.) 40 40 40 40 40 40 40 35 40 40 40 30 30 35 35 35 35 15 15 15 15 15 15 15 15 Test Frequency (MHz) 200 200 200 200 200 150 150 150 150 150 150 150 150 100 100 100 100 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 Self Resonance Frequency (MHz) 1600 min. 1500 min. 1500 min. 1200 min. 1200 min. 1100 min. 1100 min. 900 min. 900 min. 750 min. 750 min. 350 min. 350 min. 700 min. 700 min. 500 min. 500 min. 550 min. 550 min. 500 min. 500 min. 400 min. 400 min. 350 min. 350 min. EIA 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805
4
LQW2BHNR12J03 LQW2BHNR15G03 LQW2BHNR15J03 LQW2BHNR18G03 LQW2BHNR18J03 LQW2BHNR22G03 LQW2BHNR22J03 LQW2BHNR27J03 LQW2BHNR27K03 LQW2BHNR33J03 LQW2BHNR33K03 LQW2BHNR39J03 LQW2BHNR39K03 LQW2BHNR47J03 LQW2BHNR47K03
Operating Temp. Range : -25C to 85C
LQW2BH_13 (High Q/Low DC Resistance Type)
Part Number LQW2BHN2N7D13 LQW2BHN3N1D13 LQW2BHN3N3D13 LQW2BHN5N6D13 LQW2BHN6N8D13 LQW2BHN8N6D13 LQW2BHN10NJ13 LQW2BHN12NK13 LQW2BHN15NK13 LQW2BHN18NK13 LQW2BHN21NK13 LQW2BHN27NK13 Inductance (nH) 2.7 0.5nH 3.1 0.5nH 3.3 0.5nH 5.6 0.5nH 6.8 0.5nH 8.6 0.5nH 10 5% 12 10% 15 10% 18.8 10% 21 10% 27 10% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 1900 1800 1700 1500 1400 1300 1320 1100 1000 1000 950 900 DC Resistance (ohm) 0.02 max. 0.02 max. 0.02 max. 0.02 max. 0.02 max. 0.03 max. 0.03 max. 0.04 max. 0.04 max. 0.05 max. 0.05 max. 0.06 max. Q (min.) 20 20 20 35 35 35 35 40 40 40 40 40 Test Frequency (MHz) 250 250 250 250 250 250 250 250 250 250 250 250 Self Resonance Frequency (MHz) 6000 min. 6000 min. 6000 min. 6000 min. 5400 min. 3900 min. 3300 min. 3200 min. 3100 min. 2600 min. 2200 min. 1800 min. EIA 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805
Operating Temp. Range : -25C to 85C
26
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Q-Frequency Characteristics
LQW2BHN_03
100 150 3.3nH 80 120
LQW2BH_13
60 Q 40 470nH 330nH
90 Q 60
12nH
20 10nH 220nH 33nH 1 10 100 Frequency(MHz) 1000 10000
30
27nH
0
0 10
100
1000 Frequency (MHz)
10000
4
s Inductance-Frequency Characteristics
LQW2BH_13
60 27nH 50
Inductance (nH)
40
30
20 12nH 10 3.3nH 0 10 100 Frequency (MHz) 1000 10000
27
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQW31H Series
2.30.2 1.60.2
LQW31H series is alumina-core-type chip inductor for high frequency circuit. Its low dc resistance and high Q due to wound structure are suitable for hand telecommunication equipment.
3.20.3
1.80.2
1.60.2
s Features
1. Inductance range from 8.8 to 100nH. 2. Because of the high self resonant frequency, it can be used in high frequency range. 3. Tight inductance tolerance (+-5%) 4. LQW31H_03: Does not contain lead.
Inductance (nH) 8.8 5% 8.8 10% 14.7 5% 14.7 10% 17 5% 17 10% 23 5% 23 10% 27 5% 27 10% 33 5% 33 10% 39 5% 39 10% 47 5% 47 10% 56 5% 56 10% 64 5% 64 10% 84 5% 84 10% 100 5% 100 10% Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Rated Current (mA) 750 750 680 680 650 650 590 590 560 560 530 530 490 490 380 380 330 330 290 290 240 240 230 230 DC Resistance (ohm) 0.029 40% 0.029 40% 0.035 40% 0.035 40% 0.037 40% 0.037 40% 0.046 40% 0.046 40% 0.051 40% 0.051 40% 0.057 40% 0.057 40% 0.067 40% 0.067 40% 0.11 40% 0.11 40% 0.14 40% 0.14 40% 0.18 40% 0.18 40% 0.28 40% 0.28 40% 0.3 40% 0.3 40% Q (min.) 50 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
4
(in mm) 0.7 min. 0.7 min. 0.7 min.
Part Number LQW31HN8N8J03 LQW31HN8N8K03 LQW31HN15NJ03 LQW31HN15NK03 LQW31HN17NJ03 LQW31HN17NK03 LQW31HN23NJ03 LQW31HN23NK03 LQW31HN27NJ03 LQW31HN27NK03 LQW31HN33NJ03 LQW31HN33NK03 LQW31HN39NJ03 LQW31HN39NK03 LQW31HN47NJ03 LQW31HN47NK03 LQW31HN56NJ03 LQW31HN56NK03 LQW31HN64NJ03 LQW31HN64NK03 LQW31HN84NJ03 LQW31HN84NK03 LQW31HNR10J03 LQW31HNR10K03
Test Frequency (MHz) 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436 436
Self Resonance Frequency (MHz) 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 1000 min. 900 min. 900 min.
EIA 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206
Operating Temp. Range : -25C to 85C
s Q-Frequency Characteristics
120 8.8nH 39nH 100
80 Q
60
40
20 100nH 0 10 50 100 500 Frequency (MHz) 1000 5000
28
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
High Frequency Winding Type LQH31H Series
2.30.2 1.60.2
s Features
1. Inductance range from 54 to 880nH 2. High Q value and stable inductance in high frequency range from 30 to 150MHz 3. Both flow and reflow soldering methods can be employed for excellent solder heat resistance. 4. LQH31H_03: Does not contain lead.
3.20.3 1.60.2
1.80.2
LQH31H series is winding type chip coil with ferrite core for high frequency.
(in mm) 0.7 min. 0.7 min. 0.7 min.
5
Part Number LQH31HN54NK03 LQH31HN95NK03 LQH31HNR14J03 LQH31HNR14K03 LQH31HNR21J03 LQH31HNR21K03 LQH31HNR29J03 LQH31HNR29K03 LQH31HNR39J03 LQH31HNR39K03 LQH31HNR50J03 LQH31HNR50K03 LQH31HNR61J03 LQH31HNR61K03 LQH31HNR75J03 LQH31HNR75K03 LQH31HNR88J03 LQH31HNR88K03
Inductance (nH) 54 10% 95 10% 145 5% 145 10% 215 5% 215 10% 290 5% 290 10% 390 5% 390 10% 500 5% 500 10% 610 5% 610 10% 750 5% 750 10% 880 5% 880 10%
Test Frequency (MHz) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Rated Current (mA) 920 790 700 700 520 520 420 420 330 330 260 260 250 250 190 190 180 180
DC Resistance (ohm) 0.035 30% 0.047 30% 0.061 30% 0.061 30% 0.11 30% 0.11 30% 0.17 30% 0.17 30% 0.26 30% 0.26 30% 0.44 30% 0.44 30% 0.48 30% 0.48 30% 0.79 30% 0.79 30% 0.86 30% 0.86 30%
Q (min.) 50 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60
Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100
Self Resonance Frequency (MHz) 800 min. 650 min. 500 min. 500 min. 430 min. 430 min. 360 min. 360 min. 300 min. 300 min. 270 min. 270 min. 240 min. 240 min. 220 min. 220 min. 200 min. 200 min.
EIA 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206
Operating Temp. Range : -25C to 85C
s Q-Frequency Characteristics
100 215nH 880nH 80 54nH 60 Q 40
20
0 1 5 10 50 100 500 1000
Frequency (MHz)
29
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
for General Use Monolithic Type LQM18N/LQM21N Series
LQM18N Series
The LQM18N series of magnetically shielded chip coils was developed by using original multilayer process technology and magnetic materials. Compact size is suitable for high density mounting. Shielded construction is not affected by interference from peripheral components.
0.40.2 Electrode
0.80.15
0.80.15 1.60.15
s Features
1. Magnetically shielded structure provides excellent characteristics in cross talk and magnetic coupling. 2. Compact size (1.6x0.8mm) and light weight 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. Both flow and reflow soldering can be applicable.
(in mm)
6
s Applications
1. Resonance circuit, traps, filter circuits 2. RF choke in telecommunication equipment, cordless phones, radio equipment
Inductance (nH) 47 20% 68 20% 82 20% 100 10% 120 10% 150 10% 180 10% 220 10% 270 10% 330 10% 390 10% 470 10% 560 10% 680 10% 820 10% 1000 10% 1200 10% 1500 10% 1800 10% 2200 10% Test Frequency (MHz) 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 Rated Current (mA) 50 50 50 50 50 50 50 50 50 35 35 35 35 35 35 25 25 25 25 15 DC Resistance (ohm) 0.30 max. 0.30 max. 0.30 max. 0.50 max. 0.50 max. 0.60 max. 0.60 max. 0.80 max. 0.80 max. 0.85 max. 1.00 max. 1.35 max. 1.55 max. 1.70 max. 2.10 max. 0.60 max. 0.80 max. 0.80 max. 0.95 max. 1.15 max. Q (min.) 10 10 10 15 15 15 15 15 15 15 15 15 15 15 15 35 35 35 35 35 Test Frequency (MHz) 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 Self Resonance Frequency (MHz) 260 min. 250 min. 245 min. 240 min. 205 min. 180 min. 165 min. 150 min. 136 min. 125 min. 110 min. 105 min. 95 min. 90 min. 85 min. 75 min. 65 min. 60 min. 55 min. 50 min.
Part Number LQM18NN47NM00 LQM18NN68NM00 LQM18NN82NM00 LQM18NNR10K00 LQM18NNR12K00 LQM18NNR15K00 LQM18NNR18K00 LQM18NNR22K00 LQM18NNR27K00 LQM18NNR33K00 LQM18NNR39K00 LQM18NNR47K00 LQM18NNR56K00 LQM18NNR68K00 LQM18NNR82K00 LQM18NN1R0K00 LQM18NN1R2K00 LQM18NN1R5K00 LQM18NN1R8K00 LQM18NN2R2K00
EIA 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603
Operating Temp. Range : -40C to +85C
30
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Q-Frequency Characteristics
80
s Inductance-Current Characteristics
10000
2200nH 60 2200nH Inductance (nH) 1000 820nH
Q
40 100nH 820nH 20 47nH 0 1 10 100 Frequency (MHz) 1000
100nH 100 47nH
10
1
10 Frequency (MHz)
100
1000
6
31
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQM21N Series
0.50.3 Electrode
s Features
The LQM21N series consists of magnetically shielded chip inductors developed using Murata's original multilayer process technology and magnetic materials. The miniature size of 2.0x1.25mm enables compact design of electric equipment. Inductance range from 0.1 micro H to 4.7 micro H is available.
t
2.00.3
1.250.2
(in mm)
Dimension of t
Inductance : 0.1 to 2.2H 0.850.2 Inductance : 2.7 to 4.7H 1.250.2
Part Number LQM21NNR10K10 LQM21NNR12K10 LQM21NNR15K10 LQM21NNR18K10 LQM21NNR22K10 LQM21NNR27K10 LQM21NNR33K10 LQM21NNR39K10 LQM21NNR47K10 LQM21NNR56K10 LQM21NNR68K10 LQM21NNR82K10 LQM21NN1R0K10 LQM21NN1R2K10 LQM21NN1R5K10 LQM21NN1R8K10 LQM21NN2R2K10 LQM21NN2R7K10 LQM21NN3R3K10 LQM21NN3R9K10 LQM21NN4R7K10
Inductance (H) 0.1 10% 0.12 10% 0.15 10% 0.18 10% 0.22 10% 0.27 10% 0.33 10% 0.39 10% 0.47 10% 0.56 10% 0.68 10% 0.82 10% 1 10% 1.2 10% 1.5 10% 1.8 10% 2.2 10% 2.7 10% 3.3 10% 3.9 10% 4.7 10%
Test Frequency (MHz) 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10
Rated Current (mA) 250 250 250 250 250 250 250 200 200 150 150 150 50 50 50 50 30 30 30 30 30
DC Resistance (ohm) 0.26 max. 0.29 max. 0.32 max. 0.35 max. 0.38 max. 0.42 max. 0.48 max. 0.53 max. 0.57 max. 0.63 max. 0.72 max. 0.81 max. 0.40 max. 0.47 max. 0.50 max. 0.57 max. 0.63 max. 0.69 max. 0.80 max. 0.89 max. 1.00 max.
Q (min.) 20 20 20 20 20 20 20 25 25 25 25 25 45 45 45 45 45 45 45 45 45
Test Frequency (MHz) 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10
Self Resonance Frequency (MHz) 340 min. 310 min. 270 min. 250 min. 220 min. 200 min. 180 min. 165 min. 150 min. 140 min. 125 min. 115 min. 107 min. 97 min. 87 min. 80 min. 71 min. 66 min. 59 min. 53 min. 47 min.
EIA 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805 0805
6
Operating Temp. Range : -40C to 85C
32
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Q-Frequency Characteristics
100
s Inductance-Current Characteristics
50
1.0H 80 4.7H 0.22H 60 Q 40 Indactance (H) 5 4.7H 10 1.8H 0.1H
1.8H
20
0.18H
1
1.0H 0.82H
0
0.5 1 10 Frequency (MHz) 100 1000 0.22H
0.10H 0.1
1
5
10
50
100
500
1000
Current (mA)
6
33
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
for General Use Winding Type LQH31M/LQH32M/LQH43M (N) Series
LQH31M Series
2.30.2 1.60.2
LQH31M series consists of winding type chip coils using Murata's original ferrite core and auto winding technology.
s Features
1. Wide inductance range from 0.15 to 100 microH 2. High Q value at high frequencies and low DC resistance 3. Small size (3.2x1.6x1.8mm) and tight pitch mounting 4. Low DC resistance and large current 5. Both flow and reflow soldering heat resistance 6. LQH31M_03: Does not contain lead.
Inductance (H) 0.15 10% 0.22 10% 0.33 10% 0.47 10% 0.56 10% 0.68 10% 0.82 10% 1.0 10% 1.2 10% 1.5 5% 1.5 10% 1.8 5% 1.8 10% 2.2 5% 2.2 10% 2.7 5% 2.7 10% 3.3 5% 3.3 10% 3.9 5% 3.9 10% 4.7 5% 4.7 10% 5.6 5% 5.6 10% 6.8 5% 6.8 10% 8.2 5% 8.2 10% 10 5% 10 10% 12 5% 12 10% 15 5% 15 10% Test Frequency (MHz) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Rated Current (mA) 250 240 230 215 200 190 185 175 165 155 155 150 150 140 140 135 135 130 130 125 125 120 120 115 115 110 110 105 105 100 100 95 95 90 90 DC Resistance (ohm) 0.39 40% 0.43 40% 0.45 40% 0.83 40% 0.61 40% 0.67 40% 0.73 40% 0.49 30% 0.9 30% 1.0 30% 1.0 30% 1.6 30% 1.6 30% 0.7 30% 0.7 30% 0.55 30% 0.55 30% 1.4 30% 1.4 30% 1.5 30% 1.5 30% 1.7 30 1.7 30% 1.8 30% 1.8 30% 2.0 30% 2.0 30% 2.2 30% 2.2 30% 2.5 30% 2.5 30% 2.7 30% 2.7 30% 3.0 30% 3 30% Q (min.) 20 20 30 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35
1.80.2
3.20.3
1.60.2
0.7 min. 0.7 min. 0.7 min.
(in mm)
Part Number
7
Test Frequency (MHz) 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 5 5 5 5 5 5
Self Resonance Frequency (MHz) 250 min. 250 min. 250 min. 200 min. 180 min. 160 min. 120 min. 100 min. 90 min. 75 min. 75 min. 60 min. 60 min. 50 min. 50 min. 43 min. 43 min. 38 min. 38 min. 35 min. 35 min. 31 min. 31 min. 28 min. 28 min. 25 min. 25 min. 23 min. 23 min. 20 min. 20 min. 18 min. 18 min. 16 min. 16 min.
EIA 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206
LQH31MNR15K03 LQH31MNR22K03 LQH31MNR33K03 LQH31MNR47K03 LQH31MNR56K03 LQH31MNR68K03 LQH31MNR82K03 LQH31MN1R0K03 LQH31MN1R2K03 LQH31MN1R5J03 LQH31MN1R5K03 LQH31MN1R8J03 LQH31MN1R8K03 LQH31MN2R2J03 LQH31MN2R2K03 LQH31MN2R7J03 LQH31MN2R7K03 LQH31MN3R3J03 LQH31MN3R3K03 LQH31MN3R9J03 LQH31MN3R9K03 LQH31MN4R7J03 LQH31MN4R7K03 LQH31MN5R6J03 LQH31MN5R6K03 LQH31MN6R8J03 LQH31MN6R8K03 LQH31MN8R2J03 LQH31MN8R2K03 LQH31MN100J03 LQH31MN100K03 LQH31MN120J03 LQH31MN120K03 LQH31MN150J03 LQH31MN150K03
Continued on the following page.
34
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQH31MN180J03 LQH31MN180K03 LQH31MN220J03 LQH31MN220K03 LQH31MN270J03 LQH31MN270K03 LQH31MN330J03 LQH31MN330K03 LQH31MN390J03 LQH31MN390K03 LQH31MN470J03 LQH31MN470K03 LQH31MN560J03 LQH31MN560K03 LQH31MN680J03 LQH31MN680K03 LQH31MN820J03 LQH31MN820K03 LQH31MN101J03 LQH31MN101K03 Inductance (H) 18 5% 18 10% 22 5% 22 10% 27 5% 27 10% 33 5% 33 10% 39 5% 39 10% 47 5% 47 10% 56 5% 56 10% 68 5% 68 10% 82 5% 82 10% 100 5% 100 10% Test Frequency (MHz) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Rated Current (mA) 85 85 85 85 85 85 80 80 55 55 55 55 50 50 50 50 45 45 45 45 DC Resistance (ohm) 3.4 30% 3.4 30% 3.1 30% 3.1 30% 3.4 30% 3.4 30% 3.8 30% 3.8 30% 7.2 30% 7.2 30% 8 30% 8.0 30% 8.9 30% 8.9 30% 9.9 30% 9.9 30% 11 30% 11 30% 12 30% 12 30% Q (min.) 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 Test Frequency (MHz) 5 5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Self Resonance Frequency (MHz) 15 min. 15 min. 14 min. 14 min. 13 min. 13 min. 12 min. 12 min. 11 min. 11 min. 10 min. 10 min. 9 min. 9 min. 8.5 min. 8.5 min. 7.5 min. 7.5 min. 7 min. 7 min. EIA 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206
Operating Temp. Range : -25C to 85C
7
s Q-Frequency Characteristics
100
s Inductance-Current Characteristics
500
80 100H 60 Q 50 40 Inductance (H) 33H 10H 1H 100 100H
20
10H 10
0 0.5 1 5 10 50 100 5
Frequency (MHz) 1.0H 1
5
10
50
100
500
Current (mA)
s Coupling Coefficient
10
Coupling Coefficient (%)
8 R 6 R=0.9mm 4 (2.5mm Pitch Parallel Mounting)
2 R=2.0mm 0 0.5 1 5 Inductance (H) 10 50 100
35
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQH32M Series
2.50.2 2.50.2 2.00.2
LQH32M series consists of miniature chip inductors wound on a special ferrite core.
s Features
1. High Q value at high frequencies and low DC resistance 2. Wide inductance range from 1.0 to 560 micro H 3. LQH32M_23: Does not contain lead.
3.20.3 2.50.2
0.90.3 1.30.2
0.90.3
(in mm)
Part Number LQH32MN1R0M23 LQH32MN1R2M23 LQH32MN1R5K23 LQH32MN1R8K23 LQH32MN2R2K23 LQH32MN2R7K23 LQH32MN3R3K23 LQH32MN3R9K23 LQH32MN4R7K23 LQH32MN5R6K23 LQH32MN6R8K23 LQH32MN8R2K23 LQH32MN100J23 LQH32MN100K23 LQH32MN120J23 LQH32MN120K23 LQH32MN150J23 LQH32MN150K23 LQH32MN180J23 LQH32MN180K23 LQH32MN220J23 LQH32MN220K23 LQH32MN270J23 LQH32MN270K23 LQH32MN330J23 LQH32MN330K23 LQH32MN390J23 LQH32MN390K23 LQH32MN470J23 LQH32MN470K23 LQH32MN560J23 LQH32MN560K23 LQH32MN680J23 LQH32MN680K23 LQH32MN820J23 LQH32MN820K23 LQH32MN101J23 LQH32MN101K23 LQH32MN121J23 LQH32MN121K23 LQH32MN151J23 LQH32MN151K23
Inductance (H) 1.0 20% 1.2 20% 1.5 10% 1.8 10% 2.2 10% 2.7 10% 3.3 10% 3.9 10% 4.7 10% 5.6 10% 6.8 10% 8.2 10% 10 5% 10 10% 12 5% 12 10% 15 5% 15 10% 18 5% 18 10% 22 5% 22 10% 27 5% 27 10% 33 5% 33 10% 39 5% 39 10% 47 5% 47 10% 56 5% 56 10% 68 5% 68 10% 82 5% 82 10% 100 5% 100 10% 120 5% 120 10% 150 5% 150 10%
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz
Rated Current (mA) 445 425 400 390 370 320 300 290 270 250 240 225 190 190 180 180 170 170 165 165 150 150 125 125 115 115 110 110 100 100 85 85 80 80 70 70 80 80 75 75 70 70
DC Resistance (ohm) 0.5 max. 0.6 max. 0.6 max. 0.7 max. 0.8 max. 0.9 max. 1.0 max. 1.1 max. 1.2 max. 1.3 max. 1.5 max. 1.6 max. 1.8 max. 1.8 max. 2.0 max. 2.0 max. 2.2 max. 2.2 max. 2.5 max. 2.5 max. 2.8 max. 2.8 max. 3.1 max. 3.1 max. 3.5 max. 3.5 max. 3.9 max. 3.9 max. 4.3 max. 4.3 max. 4.9 max. 4.9 max. 5.5 max. 5.5 max. 6.2 max. 6.2 max. 7.0 max. 7.0 max. 8.0 max. 8.0 max. 9.3 max. 9.3 max.
Q (min.) 20 20 20 20 20 20 20 20 20 20 20 20 35 35 35 35 35 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz
Self Resonance Frequency (MHz) 100 min. 100 min. 75 min. 60 min. 50 min. 43 min. 38 min. 35 min. 31 min. 28 min. 25 min. 23 min. 20 min. 20 min. 18 min. 18 min. 16 min. 16 min. 15 min. 15 min. 14 min. 14 min. 13 min. 13 min. 12 min. 12 min. 11 min. 11 min. 11 min. 11 min. 10 min. 10 min. 9 min. 9 min. 8.5 min. 8.5 min. 8 min. 8 min. 7.5 min. 7.5 min. 7 min. 7 min.
EIA 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
7
Continued on the following page.
36
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQH32MN181J23 LQH32MN181K23 LQH32MN221J23 LQH32MN221K23 LQH32MN271J23 LQH32MN271K23 LQH32MN331J23 LQH32MN331K23 LQH32MN391J23 LQH32MN391K23 LQH32MN471J23 LQH32MN471K23 LQH32MN561J23 LQH32MN561K23 Inductance (H) 180 5% 180 10% 220 5% 220 10% 270 5% 270 10% 330 5% 330 10% 390 5% 390 10% 470 5% 470 10% 560 5% 560 10% Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1kHz 1kHz 1kHz 1kHz Rated Current (mA) 65 65 65 65 65 65 65 65 50 50 45 45 40 40 DC Resistance (ohm) 10.2 max. 10.2 max. 11.8 max. 11.8 max. 12.5 max. 12.5 max. 13.0 max. 13.0 max. 22.0 max. 22.0 max. 25.0 max. 25.0 max. 28.0 max. 28.0 max. Q (min.) 40 40 40 40 40 40 40 40 50 50 50 50 50 50 Test Frequency 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz Self Resonance Frequency (MHz) 6 min. 6 min. 5.5 min. 5.5 min. 5 min. 5 min. 5 min. 5 min. 5 min. 5 min. 5 min. 5 min. 5 min. 5 min. EIA 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
Operating Temp. Range : -25C to 85C
s Q-Frequency Characteristics
100
s Inductance-Current Characteristics
500 220H
80 100H 60 Q 50 40 Inductance (H) 1H 10H 100H 100 39H
7
20
10H 10 3.9H
0 0.1 0.5 1 Frequency (MHz) 5 10 5
1
1.0H
5
10
50
100
500
Current (mA)
37
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQH43M/N Series
3.60.2 3.20.2
LQH43M/N series consists of winding type chip coils for general use by Murata's original auto winding technology and ferrite core.
2.60.2
s Features
1. High Q value at high frequency and low DC resistance 2. Wide inductance range from 1.0 to 2200 micro H 3. Large current and large inductance 4. LQH43M/N_03: Does not contain lead.
4.50.3
3.20.2
1.0min. 1.0min. 1.0min.
(in mm)
Part Number LQH43MN1R0M03 LQH43MN1R2M03 LQH43MN1R5M03 LQH43MN1R8M03 LQH43MN2R2M03 LQH43MN2R7M03 LQH43MN3R3M03 LQH43MN3R9M03 LQH43MN4R7K03 LQH43MN5R6K03 LQH43MN6R8K03 LQH43MN8R2K03 LQH43MN100J03 LQH43MN100K03 LQH43MN120J03 LQH43MN120K03 LQH43MN150J03 LQH43MN150K03 LQH43MN180J03 LQH43MN180K03 LQH43MN220J03 LQH43MN220K03 LQH43MN270J03 LQH43MN270K03 LQH43MN330J03 LQH43MN330K03 LQH43MN390J03 LQH43MN390K03 LQH43MN470J03 LQH43MN470K03 LQH43MN560J03 LQH43MN560K03 LQH43MN680J03 LQH43MN680K03 LQH43MN820J03 LQH43MN820K03 LQH43MN101J03 LQH43MN101K03 LQH43MN121J03 LQH43MN121K03 LQH43MN151J03 LQH43MN151K03
Inductance (H) 1.0 20% 1.2 20% 1.5 20% 1.8 20% 2.2 20% 2.7 20% 3.3 20% 3.9 20% 4.7 10% 5.6 10% 6.8 10% 8.2 10% 10 5% 10 10% 12 5% 12 10% 15 5% 15 10% 18 5% 18 10% 22 5% 22 10% 27 5% 27 10% 33 5% 33 10% 39 5% 39 10% 47 5% 47 10% 56 5% 56 10% 68 5% 68 10% 82 5% 82 10% 100 5% 100 10% 120 5% 120 10% 150 5% 150 10%
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz
Rated Current (mA) 500 500 500 500 500 500 500 500 500 500 450 450 400 400 380 380 360 360 340 340 320 320 300 300 270 270 240 240 220 220 200 200 180 180 170 170 160 160 150 150 130 130
DC Resistance (ohm) 0.20 max. 0.20 max. 0.30 max. 0.30 max. 0.30 max. 0.32 max. 0.35 max. 0.38 max. 0.40 max. 0.47 max. 0.50 max. 0.56 max. 0.56 max. 0.56 max. 0.62 max. 0.62 max. 0.73 max. 0.73 max. 0.82 max. 0.82 max. 0.94 max. 0.94 max. 1.1 max. 1.1 max. 1.2 max. 1.2 max. 1.4 max. 1.4 max. 1.5 max. 1.5 max. 1.7 max. 1.7 max. 1.9 max. 1.9 max. 2.2 max. 2.2 max. 2.5 max. 2.5 max. 3.0 max. 3.0 max. 3.7 max. 3.7 max.
Q (min.) 20 20 20 20 20 20 20 20 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 40 40 40 40 40 40
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz
Self Resonance Frequency (MHz) 120 min. 100 min. 85 min. 75 min. 62 min. 53 min. 47 min. 41 min. 38 min. 33 min. 31 min. 27 min. 23 min. 23 min. 21 min. 21 min. 19 min. 19 min. 17 min. 17 min. 15 min. 15 min. 14 min. 14 min. 12 min. 12 min. 11 min. 11 min. 10 min. 10 min. 9.3 min. 9.3 min. 8.4 min. 8.4 min. 7.5 min. 7.5 min. 6.8 min. 6.8 min. 6.2 min. 6.2 min. 5.5 min. 5.5 min.
EIA 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812
7
Continued on the following page.
38
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com Continued from the preceding page.
Part Number LQH43MN181J03 LQH43MN181K03 LQH43MN221J03 LQH43MN221K03 LQH43MN271J03 LQH43MN271K03 LQH43MN331J03 LQH43MN331K03 LQH43MN391J03 LQH43MN391K03 LQH43MN471J03 LQH43MN471K03 LQH43MN561J03 LQH43MN561K03 LQH43MN681J03 LQH43MN681K03 LQH43MN821J03 LQH43MN821K03 LQH43MN102J03 LQH43MN102K03 LQH43MN122J03 LQH43MN122K03 LQH43MN152J03 LQH43MN152K03 LQH43NN182J03 LQH43NN182K03 LQH43NN222J03 LQH43NN222K03 Inductance (H) 180 5% 180 10% 220 5% 220 10% 270 5% 270 10% 330 5% 330 10% 390 5% 390 10% 470 5% 470 10% 560 5% 560 10% 680 5% 680 10% 820 5% 820 10% 1000 5% 1000 10% 1200 5% 1200 10% 1500 5% 1500 10% 1800 5% 1800 10% 2200 5% 2200 10% Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz 1kHz Rated Current (mA) 120 120 110 110 100 100 95 95 90 90 80 80 70 70 65 65 60 60 50 50 45 45 40 40 35 35 30 30 DC Resistance (ohm) 4.5 max. 4.5 max. 5.4 max. 5.4 max. 6.8 max. 6.8 max. 8.2 max. 8.2 max. 9.7 max. 9.7 max. 11.8 max. 11.8 max. 14.5 max. 14.5 max. 17.0 max. 17.0 max. 20.5 max. 20.5 max. 25.0 max. 25.0 max. 30.0 max. 30.0 max. 37.0 max. 37.0 max. 45.0 max. 45.0 max. 50.0 max. 50.0 max. Q (min.) 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 Test Frequency 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 796kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz 252kHz Self Resonance Frequency (MHz) 5 min. 5 min. 4.5 min. 4.5 min. 4 min. 4 min. 3.6 min. 3.6 min. 3.3 min. 3.3 min. 3 min. 3 min. 2.7 min. 2.7 min. 2.5 min. 2.5 min. 2.2 min. 2.2 min. 2 min. 2 min. 1.8 min. 1.8 min. 1.6 min. 1.6 min. 1.5 min. 1.5 min. 1.3 min. 1.3 min. EIA 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812
7
Operating Temp. Range : -25C to 85C
s Q-Frequency Characteristics
100
s Inductance-Current Characteristics
5000
1000H 80 1000
2200H
60 Q 40
100H
1000H
Inductance (H)
10H
500 390H
20
100H 100
0 0.1 0.5 1 Frequency (MHz) 10H 5 10 50 39H
10
5
10
50
100
500
Current (mA)
39
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
for Choke Monolithic Type LQM21D/LQM21F/LQM31F Series
LQM21D Series
0.50.3 Electrode
The LQM21D series consists of magnetically shielded chip inductors. It has less than half the DC resistance of our conventional monolithic chip inductors as well as high inductance.
t
2.00.2
1.250.2
s Features
1. The inductors have very low DC resistance. 2. The series has an inductance range of 1.0 micro H to 47 micro H. 3. Magnetically shielded structure provides excellent crosstalk characteristics. 4. Compact (2.0x1.25mm) and lightweight 5. Outstanding solder heat resistance. Either flow or reflow soldering methods can be employed.
Inductance (H) 1.0 30% 2.2 30% 4.7 30% 10 30% 22 30% 47 30% Test Frequency (MHz) 1 1 1 1 1 1 Rated Current (mA) 60 40 30 15 13 7
(in mm)
Dimension of t
Inductance : 1.0 to 10H 0.850.2 Inductance : 22 to 47H 1.250.2
Part Number LQM21DN1R0N00
DC Resistance (ohm) 0.10 max. 0.17 max. 0.30 max. 0.50 max. 0.65 max. 1.20 max.
Self Resonance Frequency (MHz) 75 min. 50 min. 35 min. 24 min. 16 min. 7.5 min.
EIA 0805 0805 0805 0805 0805 0805
8
LQM21DN2R2N00 LQM21DN4R7N00 LQM21DN100N00 LQM21DN220N00 LQM21DN470N00
Operating Temp. Range : -40C to 85C
s Impedance-Frequency Characteristics
LQM21D
10000 47H 22H 10H 1000 Impedance ()
100 4.7H 2.5H 1.0H
10
1 1 10 Frequency (MHz) 100 1000
40
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQM21F Series
0.50.3
The LQM21F series consists of magnetically shielded chip coils based on Murata's technologies of multilayer process and magnetic materials. Excellent direct current characteristics are realized by using magnetic materials which have excellent saturation characteristics. The inductance of LQM21F is four times as large as that of conventional items.
Electrode
2.00.2
t
1.250.2
(in mm)
s Features
1. LQM21F series is suitable for power line choke because of its excellent direct current characteristics. The series has larger rated current (60mA at 10 micro H) than conventional rated current. 2. Low DC resistance is realized. 3. The cross talk characteristics are excellent because of the use of magnetically shielded structure. 4. Small size (2.0x1.25mm) and light weight 5. The series has excellent solder heat resistance. Both flow and reflow soldering can be employed.
Inductance (H) 1.0 30% 2.2 30% 4.7 30% 10 30% 22 30% 47 30% Test Frequency (MHz) 1 1 1 1 1 1 Rated Current (mA) 220 150 80 60 13 7
Dimension of t Inductance : 1.0 to 2.2H 0.850.2 Inductance : 4.7 to 47H 1.250.2
Part Number LQM21FN1R0N00 LQM21FN2R2N00 LQM21FN4R7N00 LQM21FN100N00 LQM21FN220N00 LQM21FN470N00
DC Resistance (ohm) 0.20 30% 0.28 30% 0.30 30% 0.50 30% 0.35 30% 0.60 30%
Self Resonance Frequency (MHz) 105 min. 70 min. 25 min. 15 min. 15 min. 7.5 min.
EIA 0805 0805 0805 0805 0805 0805
8
Operating Temp. Range : -40C to 85C
s Impedance-Frequency Characteristics
LQM21F
100000
s Inductance-Current Characteristics
LQM21F
100 47H 22H
10000 47H 22H Inductance (H) Impedance () 1000 10H 10
10H 4.7H 2.2H 1.0H 1
100 4.7H 10 1.0H 1 1 10 Frequency (MHz) 100 1000 2.2H
0.1 1 10 DC Current (mA) 100 1000
41
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQM31F Series
LQM31F series consists of magnetically shielded chip coils based on Murata's technologies of multilayer process and magnetic materials. Excellent direct current characteristics and low DC resistance are realized by using magnetic materials which have excellent saturation characteristics and high permeability.
0.70.3
1.00.2
3.20.2
1.60.2
s Features
1. LQM31F series is suitable for power line choke because of its excellent direct current characteristics and large rated current (70mA at 10 micro H). 2. Low DC resistance is realized. 3. The cross talk characteristics are excellent because of magnetically shielded structure. 4. Low profile 1.0mm 5. The series has excellent solder heat resistance. Both flow and reflow soldering can be employed.
(in mm)
s Applications
Circuits for DC power line choke of telecommunication equipment such as PDA, Note-PC, digital camera, MD and DVD-RAM
8
Part Number LQM31FN100M00 Inductance (H) 10 20% Test Frequency (MHz) 1 Rated Current (mA) 70 DC Resistance (ohm) 0.50 max. Self Resonance Frequency (MHz) 20 min. EIA 1206
Operating Temp. Range : -40C to 85C
s Impedance-Frequency Characteristics
LQM31F
10000
s Inductance-Current Characteristics
LQM31F
100
1000 Inductance (H) Impedance ()
100
10
10
1 1 10 Frequency (MHz) 100 1000
1 1 10 DC Current (mA) 100
42
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
for Choke Winding Type LQH31C/LQH32C/LQH43C Series
LQH31C Series
2.30.2 1.60.2
s Features
LQH31C series consists of miniature chip inductors with low DC resistance, high current capacity, and high impedance characteristics. It is suitable for use as choke coils in DC power supply circuits. High rated current up to 970mA is available. LQH31C_03: Does not contain lead.
1.80.2
3.20.3
1.60.2
0.7min.
0.7min.
0.7min.
(in mm)
Part Number LQH31CNR12M03 LQH31CNR22M03 LQH31CNR47M03 LQH31CN1R0M03 LQH31CN2R2M03 LQH31CN4R7M03 LQH31CN100K03 LQH31CN220K03 LQH31CN470K03 LQH31CN101K03
Inductance (H) 0.12 20% 0.22 20% 0.47 20% 1.0 20% 2.2 20% 4.7 20% 10 10% 22 10% 47 10% 100 10%
Test Frequency (MHz) 1 1 1 1 1 1 1 1 1 1
Rated Current (mA) 970 850 700 510 430 340 230 160 100 80
DC Resistance (ohm) 0.08 40% 0.1 40% 0.15 40% 0.28 30% 0.41 30% 0.65 30% 1.3 30% 3.0 30% 8.0 30% 12 30%
Self Resonance Frequency (MHz) 250 min. 250 min. 180 min. 100 min. 50 min. 31 min. 20 min. 14 min. 10 min. 7 min.
EIA 1206 1206 1206 1206 1206 1206 1206 1206 1206 1206
9
Operating Temp. Range : -25C to 85C
s Impedance-Frequency Characteristics
1000
s Inductance-Current Characteristics
100 100H Impedance (k) 10H 10 1.0H 1 Inductance (H) 100H 100
0.1
10H 10
0.01 0.01 0.1 1 10 Frequency (MHz) 1.0H 1 100 1000
5
10
50
100
500
Current (mA)
43
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
2.50.2 2.50.2
LQH32C series consists of miniature chip coils with low DC resistance, high current capacity, and high impedance characteristics. These features are made possible by the development of Murata's innovative automatic winding techniques.
2.00.2
3.20.3
2.50.2
s Features (LQH32C_23/_33)
1. Low DC resistance, high rated current and high inductance. Inductance : 0.15 to 560 micro H. 2. The series exhibits low voltage drops and small variations in inductance with respect to temperature rise and DC current level. This makes them excellent for use as power supply line choke coils. 3. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. 4. LQH32C_23/_33: Does not contain lead.
LQH32C_23/_33
0.90.3 1.30.2 0.90.3 (in mm)
LQH32C_23 Series
Part Number LQH32CN1R0M23 LQH32CN2R2M23 LQH32CN4R7M23 LQH32CN100K23 LQH32CN220K23 LQH32CN470K23 LQH32CN101K23 Inductance (H) 1.0 20% 2.2 20% 4.7 20% 10 10% 22 10% 47 10% 100 10% 220 10% 330 10% 390 10% 470 10% 560 10% Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1kHz 1kHz Rated Current (mA) 800 600 450 300 250 170 100 70 60 60 60 60 DC Resistance (ohm) 0.06 30% 0.13 30% 0.2 30% 0.44 30% 0.71 30% 1.3 30% 3.5 30% 8.4 30% 10 30% 17 30% 19 30% 22 30% Self Resonance Frequency (MHz) 96 min. 64 min. 43 min. 26 min. 19 min. 15 min. 10 min. 6.8 min. 5.6 min. 5 min. 5 min. 5 min. EIA 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
9
LQH32CN221K23 LQH32CN331K23 LQH32CN391K23 LQH32CN471K23 LQH32CN561K23
Operating Temp. Range : -25C to 85C
LQH32C_33 Series (Low DC Resistance Type)
Part Number LQH32CNR15M33 LQH32CNR27M33 LQH32CNR47M33 LQH32CN1R0M33 LQH32CN2R2M33 LQH32CN4R7M33 LQH32CN100K33 Inductance (H) 0.15 20% 0.27 20% 0.47 20% 1.0 20% 2.2 20% 4.7 20% 10 10% Test Frequency (MHz) 1 1 1 1 1 1 1 Rated Current (mA) 1450 1250 1100 1000 790 650 450 DC Resistance (ohm) 0.028 30% 0.034 30% 0.042 30% 0.06 30% 0.097 30% 0.15 30% 0.3 30% Self Resonance Frequency (MHz) 400 min. 250 min. 150 min. 100 min. 64 min. 43 min. 26 min. EIA 1210 1210 1210 1210 1210 1210 1210
Operating Temp. Range : -25C to 85C
44
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Impedance-Frequency Characteristics
LQH32C_23/_33
1000
s Inductance-Current Characteristics
LQH32C_23/_33
1000
100 100H Impedance (k) Inductance (H) 10 10H 100
100H
1
1.0H
10
10H
0.1 1 0.01 0.01 0.1 1 10 Frequency (MHz) 100 1000 0.1 1
1.0H
10 DC Current (mA)
100
1000
9
45
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQH32C_53 Series (Low Profile Type)
2.50.2 2.50.2
LQH32C_53 series consists of miniature chip coils with low DC resistance, high current capacity, and high impedance characteristics. These features are made possible by the development of Murata's innovative winding techniques. They are excellent for use as choke coils in DC power supply circuits.
A
1.550.15 3.20.3
A
2.50.2
A : 2.8 max.
s Features (LQH32C_53)
1. The series has a wide inductance range of 1.0 to 100 micro H. 2. The series exhibit low voltage drops and small variations in inductance with respect to temperature rise and DC current level. This makes them excellent for use as power supply line choke coils. 3. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. 4. LQH32C_53: Does not contain lead.
Inductance (H) 1.0 20% 2.2 20% 4.7 20% 10 10% 15 10% 22 10% 33 10% 47 10% 68 10% 100 10% Test Frequency (MHz) 1 1 1 1 1 1 1 1 1 1 Rated Current (mA) 1000 790 650 450 300 250 200 170 130 100
0.90.3 1.30.2 0.90.3 (in mm)
Part Number LQH32CN1R0M53 LQH32CN2R2M53 LQH32CN4R7M53 LQH32CN100K53 LQH32CN150K53 LQH32CN220K53
DC Resistance (ohm) 0.060 30% 0.097 30% 0.15 30% 0.30 30% 0.58 30% 0.71 30% 1.1 30% 1.3 30% 2.2 30% 3.5 30%
Self Resonance Frequency (MHz) 100 min. 64 min. 43 min. 26 min. 26 min. 19 min. 17 min. 15 min. 12 min. 10 min.
EIA 1210 1210 1210 1210 1210 1210 1210 1210 1210 1210
9
LQH32CN330K53 LQH32CN470K53 LQH32CN680K53 LQH32CN101K53
Operating Temp. Range : -25C to 85C
s Impedance-Frequency Characteristics
LQH32C_53
100
s Inductance-Current Characteristics
LQH32C_53
1000
100uH 10 Impedance (k) Inductance (H) 100uH 100 10uH
1
10
10uH
1.0uH 0.1
1.0uH 1 0.01
0.001 1 10 Frequency(MHz) 100
0.1 1000 1 10 DC Current (mA) 100
1000
46
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQH43C Series
3.60.2 3.20.2
LQH43C series consists of miniature chip inductors with low DC resistance, high current capacity, and high impedance characteristics. It is suitable for use as choke coils in DC power supply circuits.
4.50.3
2.60.2
3.20.2
s Features
1. Various inductance ranges are available. 2. The series exhibits low voltage drops and small change in inductance with respect to temperature rise and DC current level. This makes them excellent to use as power supply line choke coils. 3. Small size 4.5x3.2mm and realized low height 2.8mm max. 4. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. 5. LQH43C_03: Does not contain lead.
Inductance (H) 1.0 20% 1.5 20% 2.2 20% 3.3 20% 4.7 20% 6.8 20% 10 10% 15 10% 22 10% 33 10% 47 10% 68 10% 100 10% 150 10% 220 10% 330 10% 470 10% Rated Current (mA) 1080 1000 900 800 750 720 650 570 420 310 280 220 190 130 110 100 90
1.0min. 1.0min. 1.0min.
(in mm)
Part Number LQH43CN1R0M03 LQH43CN1R5M03 LQH43CN2R2M03 LQH43CN3R3M03 LQH43CN4R7M03 LQH43CN6R8M03 LQH43CN100K03 LQH43CN150K03 LQH43CN220K03 LQH43CN330K03 LQH43CN470K03 LQH43CN680K03 LQH43CN101K03 LQH43CN151K03 LQH43CN221K03 LQH43CN331K03 LQH43CN471K03
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1kHz
DC Resistance (ohm) 0.08 max. 0.09 max. 0.11 max. 0.13 max. 0.15 max. 0.20 max. 0.24 max. 0.32 max. 0.6 max. 1.0 max. 1.1 max. 1.7 max. 2.2 max. 3.5 max. 4.0 max. 6.8 max. 8.5 max.
Self Resonance Frequency (MHz) 100 min. 85 min. 60 min. 47 min. 35 min. 30 min. 23 min. 20 min. 15 min. 12 min. 10 min. 8.4 min. 6.8 min. 5.5 min. 4.5 min. 3.6 min. 3.0 min.
EIA 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812 1812
9
Operating Temp. Range : -25C to 85C
s Impedance-Frequency Characteristics
1000
s Inductance-Current Characteristics
1000
100H 100 100 Impedance (k) Inductance (H) 10H 10 1.0H 100H
10
10H
1
1.0H 1 0.1
0.01 0.01
0.1
1 10 Frequency (MHz)
100
1000
0.1 1
10
100 DC Current (mA)
1000
10000
47
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
for Choke Magnetic Shielded Type LQH3KS Series
LQH3KS_23 Series
3.30.3
1. Low profile dimension (2.1mm max.) and small size of 1212 (3.3x3.3mm) are suitable for portable equipment. 2. The series has low DC Resistance. 3. Large inductance of 560 to 2200 microH. 4. Magnetically shielded structure prevents interference occurring between peripheral components. 5. LQH3KS_23: Does not contain lead.
3.30.3
2.1max.
s Features
0.9 0.3
1.3 0.2
0.9 0.3
(in mm)
Part Number LQH3KSN561N23 LQH3KSN681N23 LQH3KSN102N23 LQH3KSN152N23 LQH3KSN222N23
Inductance (H) 560 30% 680 30% 1000 30% 1500 30% 2200 30%
Test Frequency (kHz) 100 100 10 10 10
Rated Current (mA) 50 40 30 25 20
DC Resistance (ohm) 7.8 30% 9.1 30% 11 30% 23 30% 28 30%
Self Resonance Frequency (MHz) 3.0 min. 2.6 min. 2.1 min. 1.7 min. 1.5 min.
EIA 1212 1212 1212 1212 1212
Operating Temp. Range : -25C to 85C
s Impedance-Frequency Characteristics
1000
s Inductance-Current Characteristics
10000
10
Impedance (k)
100 2200H Inductance (H) 1000H 10 560H 1000
2200H 1000H 560H
1
100
0.1
0.01 0.01
0.1 Frequency (MHz)
1
10
10 1 10 DC Current (mA) 100
48
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQH3KS_53 Series (Low Profile Type)
3.30.3
LQH3KS_53 series consists of miniature chip inductors with high current capacity and low DC resistance. These features are achieved by Murata's innovative winding technology.
3.30.3
s Features
1. Low profile (1.8mm max.) and small size (3.3x3.3mm) 2. The series has large inductance of 3.3 to 820 micro H. 3. Low DC resistance 4. Does not contain lead.
Inductance (H) 3.3 30% 4.7 30% 6.8 30% 10 20% 22 20% 33 20% 470 20% 560 20% 820 20% Rated Current (mA) 320 260 210 180 120 100 30 30 20
1.8 max.
0.9 0.3
1.3 0.2
0.9 0.3
(in mm)
Part Number LQH3KSN3R3N53 LQH3KSN4R7N53 LQH3KSN6R8N53 LQH3KSN100M53 LQH3KSN220M53 LQH3KSN330M53 LQH3KSN471M53 LQH3KSN561M53 LQH3KSN821M53
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 100kHz 100kHz 100kHz
DC Resistance (ohm) 0.07 30% 0.09 30% 0.10 30% 0.17 30% 0.40 30% 0.50 30% 6.90 30% 7.60 30% 15.5 30%
Self Resonance Frequency (MHz) 50 min. 42 min. 35 min. 28 min. 19 min. 16 min. 4.2 min. 3.8 min. 3.2 min.
EIA 1212 1212 1212 1212 1212 1212 1212 1212 1212
Operating Temp. Range : -25C to 85C
s Impedance-Frequency Characteristics
1000
s Inductance-Current Characteristics
100000 820H 100 470H Impedance (k) Inductance (H) 10 10000 820H 470H 1000 33H 100 10H 4.7H 0.01 1 10 Frequency (MHz) 100 1000 10
10
1
33H
0.1
10H 4.7H
1
10
100 DC Current (mA)
1000
49
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Chip Coils
for Choke Winding/Magnetic Shielded Type LQH55D/LQH66S Series
LQH55D Series
5.00.3 5.00.3 4.70.3 5.70.3 EIA Code:2220 1.3 min. 1.7 min. 1.3 min.
LQH55D series are winding type coils for choke by using high performance thick wire winding technology.
s Features
1. Low direct current resistance, large current capacity and large inductance 2. For DC/DC converters and DC power supply circuits 3. LQH55D_03: Does not contain lead
(in mm)
Part Number LQH55DNR12M03 LQH55DNR27M03 LQH55DNR47M03 LQH55DN1R0M03 LQH55DN1R5M03 LQH55DN2R2M03 LQH55DN3R3M03 LQH55DN4R7M03 LQH55DN6R8M03 LQH55DN100M03 LQH55DN150M03 LQH55DN220M03 LQH55DN330M03 LQH55DN470M03 LQH55DN680M03 LQH55DN101M03 LQH55DN151M03 LQH55DN221M03 LQH55DN331M03 LQH55DN471M03 LQH55DN681M03 LQH55DN102M03 LQH55DN222M03 LQH55DN472M03 LQH55DN103M03
Inductance (H) 0.12 20% 0.27 20% 0.47 20% 1.0 20% 1.5 20% 2.2 20% 3.3 20% 4.7 20% 6.8 20% 10 20% 15 20% 22 20% 33 20% 47 20% 68 20% 100 20% 150 20% 220 20% 330 20% 470 20% 680 20% 1000 20% 2200 20% 4700 20% 10000 20%
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 100kHz 100kHz 100kHz 100kHz 100kHz 100kHz 10kHz 10kHz 10kHz 10kHz
Rated Current (mA) 6000 5300 4800 4000 3700 3200 2900 2700 2000 1700 1400 1200 900 800 640 560 420 320 270 240 190 150 100 70 50
DC Resistance (ohm) 0.007 40% 0.010 40% 0.013 40% 0.019 40% 0.022 40% 0.029 40% 0.036 40% 0.041 40% 0.074 40% 0.093 40% 0.15 40% 0.19 40% 0.32 40% 0.40 40% 0.67 40% 0.86 40% 1.9 40% 2.4 40% 4.4 40% 5.4 40% 8.1 40% 10.3 40% 21.5 40% 43.6 40% 100 40%
Self Resonance Frequency (MHz) 450 min. 300 min. 200 min. 150 min. 110 min. 80 min. 40 min. 30 min. 25 min. 20 min. 17 min. 15 min. 12 min. 10 min. 7.6 min. 6.5 min. 5.0 min. 4.0 min. 3.1 min. 2.4 min. 1.9 min. 1.7 min. 1.2 min. 0.8 min. 0.5 min.
EIA 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220 2220
11
Operating Temp. Range : -25C to 80C
50
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Impedance-Frequency Characteristics
s Inductance-Current Characteristics
1000000 100000 Impedance () 10000 1000 100 10 1 0.01 0.1 1 10 100 1000 10000H 1000H 100H 10H Inductance (H) 1H 1000 1000H 10000 10000H
100
100H
Frequency (MHz)
10
10H
1
1H
0.01
0.1 DC Current (A)
1
10
11
51
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
LQH66S Series
6.30.3 6.30.3
LQH66S series are magnetic shielded type coils for choke by using high performance thick wire winding technology.
6.30.3
s Features
1. Low direct current resistance, large current capacity and large inductance 2. High density mounting 3. For DC/DC converters and DC power supply circuits 4. LQH66S_03: Does not contain lead.
4.70.3
EIA Code:2525
1.3 min.
1.7 min.
1.3 min.
(in mm)
Part Number LQH66SNR27M03 LQH66SNR68M03 LQH66SN1R0M03 LQH66SN1R5M03 LQH66SN2R2M03 LQH66SN3R3M03 LQH66SN4R7M03 LQH66SN6R8M03 LQH66SN100M03 LQH66SN150M03 LQH66SN220M03 LQH66SN330M03 LQH66SN470M03 LQH66SN680M03 LQH66SN101M03 LQH66SN151M03 LQH66SN221M03 LQH66SN331M03 LQH66SN471M03 LQH66SN681M03 LQH66SN102M03 LQH66SN222M03 LQH66SN472M03 LQH66SN103M03
Inductance (H) 0.27 20% 0.68 20% 1.0 20% 1.5 20% 2.2 20% 3.3 20% 4.7 20% 6.8 20% 10 20% 15 20% 22 20% 33 20% 47 20% 68 20% 100 20% 150 20% 220 20% 330 20% 470 20% 680 20% 1000 20% 2200 20% 4700 20% 10000 20%
Test Frequency 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 1MHz 100kHz 100kHz 100kHz 100kHz 100kHz 100kHz 10kHz 10kHz 10kHz 10kHz
Rated Current (mA) 6000 5300 4700 3800 3300 2600 2200 1800 1600 1300 1100 860 760 600 520 420 350 280 240 200 160 100 70 50
DC Resistance (ohm) 0.007 40% 0.010 40% 0.013 40% 0.016 40% 0.019 40% 0.022 40% 0.025 40% 0.029 40% 0.036 40% 0.069 40% 0.087 40% 0.14 40% 0.17 40% 0.29 40% 0.36 40% 0.63 40% 0.79 40% 1.8 40% 2.2 40% 3.9 40% 4.9 40% 9.4 40% 19.5 40% 39.7 40%
Self Resonance Frequency (MHz) 300 min. 180 min. 150 min. 110 min. 80 min. 40 min. 30 min. 25 min. 20 min. 17 min. 15 min. 12 min. 10 min. 7.6 min. 6.5 min. 5.0 min. 4.0 min. 3.2 min. 2.5 min. 2.0 min. 1.7 min. 1.2 min. 0.8 min. 0.5 min.
EIA 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525 2525
11
Operating Temp. Range : -25C to 80C
52
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
s Impedance-Frequency Characteristics
s Inductance-Current Characteristics
1000000 100000 Impedance () 10000 1000 100 10 1 0.01 0.1 1 10 100 1000 10000H 1000H 100H 10H Inductance (H) 1H 100H 1000 1000H 10000 10000H
100
Frequency (MHz)
10
10H
1
1H
0.01
0.1 DC Current (A)
1
10
11
53
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Notice (Soldering and Mounting)
1. Standard Land Dimensions A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip coil electrode.
Land Pattern Solder Resist
(in mm)
Series
LQG15H LQG18H LQM18N LQM21N/21D/21F LQM31F LQP03T LQP15M/15T LQP18M
Standard Land Dimensions
Part Number LQG15H LQG18H Flow
a
a 0.5-0.6 0.6-0.8
b 1.4-1.5 1.8-2.2 2.2-2.6 1.8-2.0 3.0-4.0 4.2-5.2 0.8-0.9 1.4-1.5 1.8-2.2
c 0.4 0.6-0.8 0.7 1.2 2.0 0.2-0.3 0.4 0.6-0.8
LQM18N
Reflow
0.7 1.0 1.2 0.2-0.3 0.5-0.6 0.7-0.9
LQM21N/21D/21F
c b
LQM31F LQP03T LQP15M/15T LQP18M
LQW15A LQW18A LQW2BH LQW31H LQH31M/31C/31H
a c
Part Number LQH31M/31C/31H
b
a 1.5 1.2 0.65
b 4.5 3.0 1.2
c 1.75 1.1 0.35
d 1.0 0.8 0.50
d
LQW31H LQW2BH LQW18A LQW15A
c
0.7-1.0 1.8-2.0 0.6-0.7 0.6-0.8
2.5min. 2.0 min. (LQW15A/18A)
If mounted at 2.5 (2.0) mm intervals as indicated in the diagram, attention should be paid to potential magnetic coupling effects when using the coil as a resonator.
LQH32M LQH32C LQH3KS
2.0 1.0
5.5
1.0 1.3 1.0
11
LQH43M LQH43N LQH43C
3.0 1.5
7.5
1.5 1.5 1.5
LQH55D LQH66S
3.5
8.0
3.0
2.0
3.0 Continued on the following page.
54
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Notice (Soldering and Mounting)
Continued from the preceding page.
Temperature (C)
2. Standard Soldering Conditions (1) Soldering method Chip coils can be flow or reflow soldered. Please contact Murata regarding other soldering methods. As for LQG, LQP, LQW15A/18A, LQH3KS/55D/66S series, please use reflow soldering. (2) Soldering Temperature and Time Solder within the temperature and time combinations indicated by the slanted lines in the following graphs. If soldering is repeated, please note that the allowed time is the accumulated time. Solder : Use H60A, H63A(JIS Z 3282) or equivalent. Use solder paste equivalent to H60A for LQP03T/15M/15T/18M and LQG15H/18H. Flux : Use rosin-based flux, but not strongly acidic flux (with chlorine content exceeding 0.2wt%). Do not use water-soluble flux.
Allowable Flow Soldering Temperature and Time
280 Solder : H60A
260
240
220
200
LQM18N LQM21N/21D/21F LQM31F LQW2BH/31H LQH31M/31C/31H LQH32M/32C/ LQH43M/43N/43C 10 Time (s) 20 30
180 0
Allowable Reflow Soldering Temperature and Time
280 Solder : H60A LQG18H 260 LQG15H, LQM18N LQM21N/21D/21F LQP03T/15M/15T/18M LQM31F LQW15A/18A LQH31M/31C LQH32M/32C LQH3KS LQH43M/43C LQH55D/66S Temperature (C)
240
220 LQW2BH/31H LQH31H 200 LQH43N 180 0
20
40
60
80
100
Time (s)
(3) Standard Soldering Conditions
Flow Soldering
Temperature (C) Preheating (in air) Soldering 200 100 0 One minute min. 3s. max. 240C Gradual cooling (in air)
11
Reflow Soldering
Temperature (C) Preheating (in air) Soldering 200 100 0 One minute min. 10s. max.* 230C Gradual cooling (in air)
LQG, LQP : 20s. max.
Continued on the following page.
55
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Notice (Soldering and Mounting)
Continued from the preceding page.
(4) Reworking with Soldering Iron Preheating at 150C for 1 minute is required. Do not directly touch the ceramic element with the tip of the soldering iron. The reworking soldering conditions are as follows: Soldering iron power output : 30W max. Temperature of soldering iron tip : 280C Diameter of soldering iron end : 3.0mm max. Soldering time : within 3 s 3. Mounting Instructions (1) Land Pattern Dimensions Large lands reduce Q of the mounted chip. Also, large protruding land areas (bordered by lines having dimensions 'c' and 'd' shown below) cause floating and electrode leaching.
Land
Solder Resist
c
d
(2) Magnetic Coupling Since some chip coils are constructed like an open magnetic circuit, narrow spacing between coils may cause magnetic coupling. The LQG and LQM LQH3KS/66S series have a magnetically shielded structure. The structure makes their coupling coefficient smaller than that of conventional chip coils. (3) PCB Warping PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. Products should be located in the sideways direction (Length:aMagnetic Coupling
a b
Poor example
Good example
11
(4) Amount of Solder Paste Excessive solder causes electrode corrosion, while insufficient solder causes low electrode bonding strength. Adjust the amount of solder paste so that solder is applied as shown on the right. o Standard thickness of solder paste LQP/LQG/LQM/LQW_A : 100 to 150m LQH/LQW_H : 200 to 300m
LQH_C/D/H/M/N LQW_H
LQH_S
LQP/LQG/LQM
LQW_A
Continued on the following page.
56
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Notice (Soldering and Mounting)
Continued from the preceding page.
(5) Amount of Adhesive If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering. Apply the adhesive in accordance with the following conditions:
LQH_C/H/M/N LQW_H
LQP/LQG/LQM
Part Number LQM18N LQM21N/21D/21F LQM31F LQW2BH LQH31M/31C/31H LQW31H LQH32M/32C LQH43M(N) LQH43C
Typical Application Amount (in:mg) MR-8153RA 0.05-0.06 0.15-0.20 0.20-0.25 0.116-0.18 0.18-0.20 0.20-0.23 0.45-0.50 NF-3000 0.06-0.07 0.20-.025 0.25-0.30 - 0.20-0.25 0.27-0.35 0.60-0.80
4. Cleaning The following conditions should be observed when cleaning chip coils: (1) Cleaning Temperature : 60C max. (40C max. for alcohol cleaning agents) (2) Ultrasonic Output : 20W/l max. Duration : 5 minutes max. Frequency : 28 to 40kHz Care should be taken not to cause resonance of the PCB and mounted products. (3) Cleaning agent The following cleaning agents have been tested on individual components. Evaluation in complete assembly should be done prior to production. a) Alcohol cleaning agents
Isopropyl alcohol (IPA) b) Aqueous cleaning agents * Surface active agent ( Clean Thru 750H ) * High grade alcohol ( Pine Alpha ST-100S ) * Hydrocarbon ( Techno Cleaner 375 ) * Alkaline Saponifier ( Aqua Cleaner 210SEI-cleaner should be diluted to 15% using deionized water. ) LQH_S series : Aqueous agents should not be used because they may cause quality deterioration. LQH series : Surface active agent and high grade alcohol can be used. (4) Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agents have been removed with deionized water. For additional cleaning methods, please contact Murata.
11
57
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Notice
s Notice (Storage and Operating Conditions)
< Operating Environment > Do not use products in chemical atmosphere such as chlorine gas, acid or sulfide gas. < Storage Requirements > 1. Storage Period LQG/LQM series should be used within 6 months; the other products should be used within 12 months. Solderability should be checked if this period is exceeded. 2. Storage conditions (1) Store products in a warehouse in compliance with the following conditions : Temperature : -10 to 40 degree C. Humidity : 30 to 70% (relative humidity) Do not subject products to rapid changes in temperature and humidity. Do not store them in chemical atmospheres such as one containing sulfurous acid gas or alkaline gas. This will prevent electrode oxidation which causes poor solderability and possible corrosion of coils. (2) Do not store products in bulk packaging to prevent collision among coils which causes core chipping and wire breakage. (3) Store products on pallets to protect from humidity, dust, etc. (4) Avoid heat shock, vibration, direct sunlight, etc.
s Notice (Handling)
This item is designed to have sufficient strength, but handle with care to avoid chipping or breaking its ceramic structure. LQW_A series * To prevent breaking the wire, avoid touching sharp material, such as tweezers, to the winding portion. * To prevent breaking the core, avoid applying excessive mechanical shock to products mounted on the board. * In some mounting machines, when picking up components, support pin pushes up the components from the bottom of base tape. In this case, please remove the support pin. The support pin may damage the components and break wire. LQH_C/D/H/M/N, LQW_H series * To prevent breaking the wire, avoid touching sharp material, such as tweezers, to the winding portion. * To prevent breaking the core, avoid applying excessive mechanical shock to products mounted on the board. LQP series * The pattern of the chip coil is covered with protective film. Take care to avoid damaging the chip coil when handling it with pick-up nozzles, sharp instruments, etc. LQM series * There is the possibility that magnetism may change the inductance value. Do not use a magnet or tweezers with magnetism when handling chip coils. (The tip of the tweezers should be molded with resin or pottery.) < Handling > 1. Avoid applying excessive stress to products to prevent damage. 2. Do not touch winding with sharp objects such as tweezers to prevent wire breakage. 3. Do not apply excessive force to products mounted on boards to prevent core breakage. < Transportations > Do not apply excessive vibration or mechanical shock to products. < Resin Coating > When coating products with resin, the relatively high resin curing stress may change inductance values. For exterior coating, select resin carefully so that electrical and mechanical performance of the product is not affected.
11
58
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Packaging
Minimum Quantity and 8mm Width Taping Dimension
1.750.1 2.00.05 2.00.05 4.00.1 o1.5 +0.1 -0 LQG15H, LQP15M/18M LQP03T/15T, LQW15A
3.50.05
8.00.2
b
c a Direction of feed
c
Paper Tape
Part Number LQG15H LQP03T LQP15T LQP15M LQP18M LQW15A Dimensions (in mm) a 0.62 0.38 0.62 0.70 1.19
0.64/0.66 0.69
Minimum QTY. (pcs.) o180mm reel o330mm reel 50000 Bulk 1000
b 1.12 0.68 1.12 1.20 2.0 1.18
c
1.0 max.
10000
50000 500 10000 -
4000 0.8 max. 10000
1.750.1 o1.5 +0.1 -0 1 0.2

a
4.00.1
2.00.05
Paper Tape
Part Number LQM21N (0.1-2.2H) LQM21D (1-10H) LQM21F (1-2.2H) LQG18H LQM18N LQW18A LQW18A_10 1.05 1.00 1.1 1.85 1.80 1.90 1.45 2.25 1.1 max. 1000 4000 10000 Dimensions (in mm) a b c Minimum QTY. (pcs.) o180mm reel o330mm reel Bulk
,, ,
(2.75) 3.50.05 4.00.1 8.00.3 b c Direction of feed LQW2BH 1 : 0.3
c
11
500
Plastic Tape
Part Number LQM21N (2.7-4.7H) LQM21D (22-47H) LQM21F (4.7-47H) LQM31F LQH31M/31C/31H, LQW31H LQW2BH LQH32M, LQH32C_33/_23 LQH32C_53 1.9 1.9 1.75 2.9 3.5 3.6 2.3 3.6 1.3 2.0 2.1 1.7 (in mm)
Continued on the following page.
Dimensions (in mm) a b c
Minimum QTY. (pcs.) o180mm reel o330mm reel Bulk
1.45
2.25
1.3
3000
10000
1000
2000
7500
-
59
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Packaging
Continued from the preceding page.
Minimum Quantity and 12mm Width Plastic Taping Dimension
5.50.1 1.750.1 2.00.1 4.00.1
8.00.1
a
Plastic Tape
Part Number LQH3KS LQH43M(N) LQH43C LQH55D LQH66S a 3.9 3.6 5.4 6.7
Dimensions (in mm) b 3.7 4.9 6.1 6.7 c 1.9 2.7 5.0 5.6 0.3 d
,, ,,,,
o1.5 +0.1 -0 d (4.75) c Direction of feed
Minimum QTY. (pcs.)
o180mm reel o330mm reel
1000 500 350
12.00.3
b
4000 2500 1500 (in mm)
0.4
11
60
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
oEKLMQG15A (High-frequency Monolithic Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 1.0nH 1.1nH 1.2nH 1.3nH 1.5nH 1.6nH 1.8nH 2.0nH 2.2nH 2.4nH 2.7nH 3.0nH 3.3nH 3.6nH 3.9nH 4.3nH 4.7nH 5.1nH 5.6nH 6.2nH 6.8nH 7.5nH 8.2nH 9.1nH 10nH 12nH 15nH 18nH 22nH 27nH 33nH 39nH 47nH 56nH 68nH 82nH 100nH 120nH Tolerance 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Q min. 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 DC Resistance () max. 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.12 0.15 0.16 0.17 0.18 0.19 0.19 0.19 0.21 0.23 0.24 0.26 0.27 0.29 0.31 0.33 0.34 0.35 0.41 0.46 0.51 0.58 0.67 0.67 1.06 1.15 1.20 1.25 1.60 1.60 1.60 Rated Current (mA) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 200 200 200 200 180 150 150 150
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
Part Number LQG15HN1N0S02 LQG15HN1N1S02 LQG15HN1N2S02 LQG15HN1N3S02 LQG15HN1N5S02 LQG15HN1N6S02 LQG15HN1N8S02 LQG15HN2N0S02 LQG15HN2N2S02 LQG15HN2N4S02 LQG15HN2N7S02 LQG15HN3N0S02 LQG15HN3N3S02 LQG15HN3N6S02 LQG15HN3N9S02 LQG15HN4N3S02 LQG15HN4N7S02 LQG15HN5N1S02 LQG15HN5N6S02 LQG15HN6N2S02 LQG15HN6N8J02 LQG15HN7N5J02 LQG15HN8N2J02 LQG15HN9N1J02 LQG15HN10NJ02 LQG15HN12NJ02 LQG15HN15NJ02 LQG15HN18NJ02 LQG15HN22NJ02 LQG15HN27NJ02 LQG15HN33NJ02 LQG15HN39NJ02 LQG15HN47NJ02 LQG15HN56NJ02 LQG15HN68NJ02 LQG15HN82NJ02 LQG15HNR10J02 LQG15HNR12J02
11
Continued on the following page.
1 61
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
oEKLMQG18A (High-frequency Monolithic Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 1.2nH 1.5nH 1.8nH 2.2nH 2.7nH 3.3nH 3.9nH 4.7nH 5.6nH 6.8nH 8.2nH 10nH 12nH 15nH 18nH 22nH 27nH 33nH 39nH 47nH 56nH 68nH 82nH 100nH Tolerance 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Q min. 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 DC Resistance () max. 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.20 0.20 0.25 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 Rated Current (mA) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
Part Number LQG18HN1N2S00 LQG18HN1N5S00 LQG18HN1N8S00 LQG18HN2N2S00 LQG18HN2N7S00 LQG18HN3N3S00 LQG18HN3N9S00 LQG18HN4N7S00 LQG18HN5N6S00 LQG18HN6N8J00 LQG18HN8N2J00 LQG18HN10NJ00 LQG18HN12NJ00 LQG18HN15NJ00 LQG18HN18NJ00 LQG18HN22NJ00 LQG18HN27NJ00 LQG18HN33NJ00 LQG18HN39NJ00 LQG18HN47NJ00 LQG18HN56NJ00 LQG18HN68NJ00 LQG18HN82NJ00 LQG18HNR10J00
oEKLMQP03B (High-frequency Film Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 0.6nH 0.8nH 1.0nH 1.2nH 1.5nH 1.8nH 2.2nH 2.7nH 3.3nH 3.9nH 4.7nH 5.6nH 6.8nH 8.2nH 10nH 12nH 15nH 18nH 22nH 27nH Tolerance 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 5% 5% 5% 5% 5% 5% 5% 3% 3% 3% Q min. 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 DC Resistance () max. 0.08 0.09 0.10 0.13 0.16 0.16 0.18 0.21 0.30 0.45 0.55 0.68 0.75 0.86 1.10 1.25 1.50 2.00 2.60 3.10 Rated Current (mA) 420 410 400 280 280 280 220 220 190 170 160 140 130 110 100 90 90 80 70 70
No. 1
Part Number LQP03TN0N6C00 LQP03TN0N8C00 LQP03TN1N0C00 LQP03TN1N2C00 LQP03TN1N5C00 LQP03TN1N8C00 LQP03TN2N2C00 LQP03TN2N7C00 LQP03TN3N3C00 LQP03TN3N9C00 LQP03TN4N7J00 LQP03TN5N6J00 LQP03TN6N8J00 LQP03TN8N2J00 LQP03TN10NJ00 LQP03TN12NJ00 LQP03TN15NJ00 LQP03TN18HJ00 LQP03TN22HJ00 LQP03TN27HJ00
11
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Continued on the following page.
2 62
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
oEKLMQP15A (High-frequency Film Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 1.0nH 1.1nH 1.2nH 1.3nH 1.5nH 1.6nH 1.8nH 2.0nH 2.2nH 2.4nH 2.7nH 3.0nH 3.3nH 3.6nH 3.9nH 4.3nH 4.7nH 5.1nH 5.6nH 6.2nH 6.8nH 7.5nH 8.2nH 9.1nH 10nH 12nH 15nH 18nH 22nH 27nH 33nH Tolerance 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 0.1nH 2% 2% 2% 2% 2% 2% 2% Q min. 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 DC Resistance () max. 0.1 0.1 0.1 0.2 0.2 0.3 0.2 0.3 0.3 0.3 0.3 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0.9 0.9 1.1 1.1 1.3 1.3 1.6 1.8 2.0 2.6 3.1 3.8 Rated Current (mA) 400 390 390 280 280 220 280 220 220 220 220 190 190 170 170 160 160 140 140 130 130 110 110 100 100 90 90 80 70 70 60
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Part Number LQP15MN1N0B02 LQP15MN1N1B02 LQP15MN1N2B02 LQP15MN1N3B02 LQP15MN1N5B02 LQP15MN1N6B02 LQP15MN1N8B02 LQP15MN2N0B02 LQP15MN2N2B02 LQP15MN2N4B02 LQP15MN2N7B02 LQP15MN3N0B02 LQP15MN3N3B02 LQP15MN3N6B02 LQP15MN3N9B02 LQP15MN4N3B02 LQP15MN4N7B02 LQP15MN5N1B02 LQP15MN5N6B02 LQP15MN6N2B02 LQP15MN6N8B02 LQP15MN7N5B02 LQP15MN8N2B02 LQP15MN9N1B02 LQP15MN10NG02 LQP15MN12NG02 LQP15MN15NG02 LQP15MN18NG02 LQP15MN22NG02 LQP15MN27NG02 LQP15MN33NG02
11
oEKLMQW15B (High-frequency Winding Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 1.5nH 2.7nH 4.3nH 4.7nH 5.1nH 6.2nH 6.8nH 7.5nH 9.1nH 10nH 12nH 15nH 18nH 22nH 27nH Tolerance 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 3% 3% 3% 3% 3% 3% 3% 3% 3% Q min. 10 20 25 25 25 25 25 25 25 25 30 30 25 25 25 DC Resistance () max. 0.03 0.05 0.07 0.07 0.12 0.09 0.09 0.13 0.14 0.17 0.14 0.16 0.27 0.30 0.52 Rated Current (mA) 1000 850 750 750 600 700 700 570 540 500 500 460 370 310 280
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Part Number LQW15AN1N5C00 LQW15AN2N7C00 LQW15AN4N3C00 LQW15AN4N7C00 LQW15AN5N1C00 LQW15AN6N2C00 LQW15AN6N8H00 LQW15AN7N5H00 LQW15AN9N1H00 LQW15AN10NH00 LQW15AN12NH00 LQW15AN15NH00 LQW15AN18NH00 LQW15AN22NH00 LQW15AN27NH00
Continued on the following page.
3 63
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
No. 16 17 18 19 20 21
Part Number LQW15AN33NH00 LQW15AN39NH00 LQW15AN47NH00 LQW15AN56NH00 LQW15AN68NJ00 LQW15AN82NJ00
Quantity (pcs.) 20 20 20 20 20 20
Inductance Nominal 33nH 39nH 47nH 56nH 68nH 82nH Tolerance 3% 3% 3% 3% 5% 5%
Q min. 25 25 25 25 20 20
DC Resistance () max. 0.63 0.70 1.08 1.17 1.96 2.24
Rated Current (mA) 260 250 210 200 140 130
oEKLMQ18GA (High-frequency Winding Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 3.6nH 3.9nH 4.3nH 5.6nH 6.2nH 6.8nH 10nH 11nH 12nH 13nH 15nH 16nH 18nH 20nH 22nH 24nH 27nH 30nH 33nH 36nH 39nH 43nH 47nH 51nH 56nH 62nH 68nH 72nH 75nH 82nH 91nH 100nH 110nH 120nH 130nH 150nH 160nH 180nH 200nH 220nH 270nH 330nH Tolerance 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 0.2nH 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% 2% Q min. 25 35 35 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 38 38 38 38 38 34 34 34 34 34 32 32 32 32 32 25 25 25 30 30 DC Resistance () max. 0.059 0.059 0.059 0.082 0.082 0.082 0.11 0.11 0.13 0.13 0.13 0.16 0.16 0.16 0.17 0.21 0.21 0.23 0.23 0.26 0.26 0.29 0.29 0.33 0.35 0.51 0.38 0.56 0.56 0.60 0.64 0.68 1.2 1.3 1.4 1.5 2.1 2.2 2.4 2.5 3.4 5.5 Rated Current (mA) 850 850 850 750 750 750 650 650 600 600 600 550 550 550 500 500 440 420 420 400 400 380 380 370 360 280 340 270 270 250 230 220 200 180 170 160 150 140 120 120 110 85
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
Part Number LQW18AN3N6C00 LQW18AN3N9C00 LQW18AN4N3C00 LQW18AN5N6C00 LQW18AN6N2C00 LQW18AN6N8C00 LQW18AN10NG00 LQW18AN11NG00 LQW18AN12NG00 LQW18AN13NG00 LQW18AN15NG00 LQW18AN16NG00 LQW18AN18NG00 LQW18AN20NG00 LQW18AN22NG00 LQW18AN24NG00 LQW18AN27NG00 LQW18AN30NG00 LQW18AN33NG00 LQW18AN36NG00 LQW18AN39NG00 LQW18AN43NG00 LQW18AN47NG00 LQW18AN51NG00 LQW18AN56NG00 LQW18AN62NG00 LQW18AN68NG00 LQW18AN72NG00 LQW18AN75NG00 LQW18AN82NG00 LQW18AN91NG00 LQW18ANR10G00 LQW18ANR11G00 LQW18ANR12G00 LQW18ANR13G00 LQW18ANR15G00 LQW18ANR16G00 LQW18ANR18G00 LQW18ANR20G00 LQW18ANR22G00 LQW18ANR27G00 LQW18ANR33G00
11
Continued on the following page.
4 64
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
No. 43 44 45 46 47 48 49 50 51
Part Number LQW18ANR39G00 LQW18ANR47G00 LQW18AN3N9C10 LQW18AN6N8C10 LQW18AN10NG10 LQW18AN12NG10 LQW18AN18NG10 LQW18AN22NG10 LQW18AN27NG10
Quantity (pcs.) 20 20 20 20 20 20 20 20 20
Inductance Nominal 390nH 470nH 3.9nH 6.8nH 10nH 12nH 18nH 22nH 27nH Tolerance 2% 2% 0.2nH 0.2nH 2% 2% 2% 2% 2%
Q min. 30 30 38 38 38 38 42 42 42
DC Resistance () max. 6.2 7.0 0.032 0.045 0.058 0.071 0.085 0.099 0.116
Rated Current (mA) 80 75 1000 900 800 750 700 640 590
oEKLMQ18JA (High-frequency Winding Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 2.2nH 3.6nH 3.9nH 4.3nH 4.7nH 5.6nH 6.2nH 6.8nH 7.5nH 8.2nH 8.7nH 9.1nH 9.5nH 10nH 11nH 12nH 13nH 15nH 16nH 18nH 20nH 22nH 24nH 27nH 30nH 33nH 36nH 39nH 43nH 47nH 51nH 56nH 62nH 68nH 72nH 75nH 82nH 91nH 100nH Tolerance 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% Q min. 25 25 38 35 35 38 35 38 35 38 35 35 35 38 35 38 35 42 40 42 40 42 40 42 40 42 40 40 40 38 38 38 38 38 34 34 34 34 34 DC Resistance () max. 0.018 0.059 0.032 0.059 0.059 0.045 0.082 0.045 0.082 0.058 0.11 0.11 0.11 0.058 0.11 0.071 0.13 0.085 0.16 0.085 0.16 0.099 0.21 0.116 0.23 0.132 0.26 0.26 0.29 0.29 0.33 0.35 0.51 0.38 0.56 0.56 0.60 0.64 0.68 Rated Current (mA) 1400 850 1000 850 850 900 750 900 750 800 650 650 650 800 650 750 600 700 550 700 550 640 500 590 420 550 400 400 380 380 370 360 280 340 270 270 250 230 220
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
Part Number LQW18AN2N2D10 LQW18AN3N6D00 LQW18AN3N9D10 LQW18AN4N3D00 LQW18AN4N7D00 LQW18AN5N6D10 LQW18AN6N2D00 LQW18AN6N8D10 LQW18AN7N5D00 LQW18AN8N2D10 LQW18AN8N7D00 LQW18AN9N1D00 LQW18AN9N5D00 LQW18AN10NJ10 LQW18AN11NJ00 LQW18AN12NJ10 LQW18AN13NJ00 LQW18AN15NJ10 LQW18AN16NJ00 LQW18AN18NJ10 LQW18AN20NJ00 LQW18AN22NJ10 LQW18AN24NJ00 LQW18AN27NJ10 LQW18AN30NJ00 LQW18AN33NJ10 LQW18AN36NJ00 LQW18AN39NJ00 LQW18AN43NJ00 LQW18AN47NJ00 LQW18AN51NJ00 LQW18AN56NJ00 LQW18AN62NJ00 LQW18AN68NJ00 LQW18AN72NJ00 LQW18AN75NJ00 LQW18AN82NJ00 LQW18AN91NJ00 LQW18ANR10J00
11
Continued on the following page.
5 65
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
No. 40 41 42 43 44 45 46 47 48 49 50 51
Part Number LQW18ANR11J00 LQW18ANR12J00 LQW18ANR13J00 LQW18ANR15J00 LQW18ANR16J00 LQW18ANR18J00 LQW18ANR20J00 LQW18ANR22J00 LQW18ANR27J00 LQW18ANR33J00 LQW18ANR39J00 LQW18ANR47J00
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20
Inductance Nominal 110nH 120nH 130nH 150nH 160nH 180nH 200nH 220nH 270nH 330nH 390nH 470nH Tolerance 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5%
Q min. 32 32 32 32 32 25 25 25 30 30 30 30
DC Resistance () max. 1.2 1.3 1.4 1.5 2.1 2.2 2.4 2.5 3.4 5.5 6.2 7.0
Rated Current (mA) 200 180 170 160 150 140 120 120 110 85 80 75
oEKLMQW2BB (High-frequency Winding Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 2.7nH 3.1nH 3.3nH 5.6nH 6.8nH 8.6nH 10nH 12nH 15nH 18.8nH 21nH 27nH 33nH 39nH 47nH 56nH 68nH 82nH 100nH 120nH 150nH 180nH 220nH 270nH 330nH 390nH 470nH Tolerance 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 0.5nH 5% 10% 10% 10% 10% 10% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 5% 10% 10% 10% 10% Q min. 20 20 20 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 30 35 35 15 15 15 15 DC Resistance () max. 0.02 0.02 0.02 0.02 0.02 0.03 0.03 0.04 0.04 0.05 0.05 0.06 0.15 0.09 0.23 0.26 0.23 0.42 0.38 0.40 0.47 0.71 0.70 2.00 2.20 2.50 2.80 Rated Current (mA) 1900 1800 1700 1500 1400 1300 1320 1100 1000 1000 950 900 570 730 450 430 460 320 350 320 390 250 240 190 180 170 160
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
Part Number LQW2BHN2N7D13 LQW2BHN3N1D13 LQW2BHN3N3D13 LQW2BHN5N6D13 LQW2BHN6N8D13 LQW2BHN8N6D13 LQW2BHN10NJ13 LQW2BHN12NK13 LQW2BHN15NK13 LQW2BHN18NK13 LQW2BHN21NK13 LQW2BHN27NK13 LQW2BHN33NJ03 LQW2BHN39NJ03 LQW2BHN47NJ03 LQW2BHN56NJ03 LQW2BHN68NJ03 LQW2BHN82NJ03 LQW2BHNR10J03 LQW2BHNR12J03 LQW2BHNR15J03 LQW2BHNR18J03 LQW2BHNR22J03 LQW2BHNR27K03 LQW2BHNR33K03 LQW2BHNR39K03 LQW2BHNR47K03
11
oEKLMQM18A (for General Use Monolithic Type)
Quantity (pcs.) 20 20 20 Inductance Nominal 47nH 68nH 82nH Tolerance 20% 20% 20% Q min. 10 10 10 DC Resistance () max. 0.30 0.30 0.30 Rated Current (mA) 50 50 50
No. 1 2 3
Part Number LQM18NN47NM00 LQM18NN68NM00 LQM18NN82NM00
Continued on the following page.
6 66
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
No. 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Part Number LQM18NNR10K00 LQM18NNR12K00 LQM18NNR15K00 LQM18NNR18K00 LQM18NNR22K00 LQM18NNR27K00 LQM18NNR33K00 LQM18NNR39K00 LQM18NNR47K00 LQM18NNR56K00 LQM18NNR68K00 LQM18NNR82K00 LQM18NN1R0K00 LQM18NN1R2K00 LQM18NN1R5K00 LQM18NN1R8K00 LQM18NN2R2K00
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Inductance Nominal 100nH 120nH 150nH 180nH 220nH 270nH 330nH 390nH 470nH 560nH 680nH 820nH 1000nH 1200nH 1500nH 1800nH 2200nH Tolerance 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10%
Q min. 15 15 15 15 15 15 15 15 15 15 15 15 35 35 35 35 35
DC Resistance () max. 0.50 0.50 0.60 0.60 0.80 0.80 0.85 1.00 1.35 1.55 1.70 2.10 0.60 0.80 0.80 0.95 1.15
Rated Current (mA) 50 50 50 50 50 50 35 35 35 35 35 35 25 25 25 25 15
oEKLMM21NA (for General Use Monolithic Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 0.1H 0.12H 0.15H 0.18H 0.22H 0.27H 0.33H 0.39H 0.47H 0.56H 0.68H 0.82H 1.0H 1.2H 1.5H 1.8H 2.2H 2.7H 3.3H 3.9H 4.7H Tolerance 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% Q min. 20 20 20 20 20 20 20 25 25 25 25 25 45 45 45 45 45 45 45 45 45 DC Resistance () max. 0.26 0.29 0.32 0.35 0.38 0.42 0.48 0.53 0.57 0.63 0.72 0.81 0.40 0.47 0.50 0.57 0.63 0.69 0.80 0.89 1.00 Rated Current (mA) 250 250 250 250 250 250 250 200 200 150 150 150 50 50 50 50 30 30 30 30 30
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
Part Number LQM21NNR10K10 LQM21NNR12K10 LQM21NNR15K10 LQM21NNR18K10 LQM21NNR22K10 LQM21NNR27K10 LQM21NNR33K10 LQM21NNR39K10 LQM21NNR47K10 LQM21NNR56K10 LQM21NNR68K10 LQM21NNR82K10 LQM21NN1R0K10 LQM21NN1R2K10 LQM21NN1R5K10 LQM21NN1R8K10 LQM21NN2R2K10 LQM21NN2R7K10 LQM21NN3R3K10 LQM21NN3R9K10 LQM21NN4R7K10
11
oEKLMM21FA (for Choke Monolithic Type)
Quantity (pcs.) 20 20 20 20 Inductance Nominal 1.0H 2.2H 4.7H 10H Tolerance 30% 30% 30% 30% DC Resistance () 0.2030% 0.2830% 0.3030% 0.5030% Rated Current (mA) 220 150 80 60
No. 1 2 3 4
Part Number LQM21FN1R0N00 LQM21FN2R2N00 LQM21FN4R7N00 LQM21FN100N00
Continued on the following page.
7 67
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
No. 5 6 7
Part Number LQM21FN220N00 LQM21FN470N00 LQM31FN100M00
Quantity (pcs.) 20 20 20
Inductance Nominal 22H 47H 10H Tolerance 30% 30% 20%
DC Resistance () 0.3530% 0.6030% 0.5 max.
Rated Current (mA) 13 7 70
oEKLMH32MB (for General Use Winding Type)
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Inductance Nominal 1.0H 1.2H 1.5H 1.8H 2.2H 2.7H 3.3H 3.9H 4.7H 5.6H 6.8H 8.2H 10H 12H 15H 18H 22H 27H 33H 39H 47H 56H 68H 82H 100H 120H 150H 180H 220H 270H 330H 390H 470H 560H Tolerance 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% DC Resistance () max. 0.50 0.60 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.50 1.60 1.8 2.0 2.2 2.5 2.8 3.1 3.5 3.9 4.3 4.9 5.5 6.2 7.0 8.0 9.3 10.2 11.8 12.5 13.0 22.0 25.0 28.0 Rated Current (mA) 445 425 400 390 370 320 300 290 270 250 240 225 190 180 170 165 150 125 115 110 100 85 80 70 80 75 70 65 65 65 65 50 45 40
Continued on the following page.
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
Part Number LQH32MN1R0M23 LQH32MN1R2M23 LQH32MN1R5K23 LQH32MN1R8K23 LQH32MN2R2K23 LQH32MN2R7K23 LQH32MN3R3K23 LQH32MN3R9K23 LQH32MN4R7K23 LQH32MN5R6K23 LQH32MN6R8K23 LQH32MN8R2K23 LQH32MN100K23 LQH32MN120K23 LQH32MN150K23 LQH32MN180K23 LQH32MN220K23 LQH32MN270K23 LQH32MN330K23 LQH32MN390K23 LQH32MN470K23 LQH32MN560K23 LQH32MN680K23 LQH32MN820K23 LQH32MN101K23 LQH32MN121K23 LQH32MN151K23 LQH32MN181K23 LQH32MN221K23 LQH32MN271K23 LQH32MN331K23 LQH32MN391K23 LQH32MN471K23 LQH32MN561K23
11
8 68
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
oEKLMH43MB (for General Use Winding Type)
Quantity (pcs.) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Inductance Nominal 1.0H 1.2H 1.5H 1.8H 2.2H 2.7H 3.3H 3.9H 4.7H 5.6H 6.8H 8.2H 10H 12H 15H 18H 22H 27H 33H 39H 47H 56H 68H 82H 100H 120H 150H 180H 220H 270H 330H 390H 470H 560H 680H 820H 1000H 1200H 1500H 1800H 2200H Tolerance 20% 20% 20% 20% 20% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% DC Resistance () max. 0.20 0.20 0.30 0.30 0.30 0.32 0.35 0.38 0.40 0.47 0.50 0.56 0.56 0.62 0.73 0.82 0.94 1.10 1.20 1.40 1.50 1.7 1.9 2.2 2.5 3.0 3.7 4.5 5.4 6.8 8.2 9.7 11.8 14.5 17.0 20.5 25.0 30.0 37.0 45.0 50.0 Rated Current (mA) 500 500 500 500 500 500 500 500 500 500 450 450 400 380 360 340 320 300 270 240 220 200 180 170 160 150 130 120 110 100 95 90 80 70 65 60 50 45 40 35 30
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41
Part Number LQH43MN1R0M03 LQH43MN1R2M03 LQH43MN1R5M03 LQH43MN1R8M03 LQH43MN2R2M03 LQH43MN2R7M03 LQH43MN3R3M03 LQH43MN3R9M03 LQH43MN4R7K03 LQH43MN5R6K03 LQH43MN6R8K03 LQH43MN8R2K03 LQH43MN100K03 LQH43MN120K03 LQH43MN150K03 LQH43MN180K03 LQH43MN220K03 LQH43MN270K03 LQH43MN330K03 LQH43MN390K03 LQH43MN470K03 LQH43MN560K03 LQH43MN680K03 LQH43MN820K03 LQH43MN101K03 LQH43MN121K03 LQH43MN151K03 LQH43MN181K03 LQH43MN221K03 LQH43MN271K03 LQH43MN331K03 LQH43MN391K03 LQH43MN471K03 LQH43MN561K03 LQH43MN681K03 LQH43MN821K03 LQH43MN102K03 LQH43MN122K03 LQH43MN152K03 LQH43NN182K03 LQH43NN222K03
11
oEKLMH32CB (for Choke Winding Type)
Quantity (pcs.) 20 20 20 20 20 Inductance Nominal 0.15H 0.27H 0.47H 1.0H 2.2H Tolerance 20% 20% 20% 20% 20% DC Resistance () 0.02830% 0.03430% 0.04230% 0.0630% 0.09730% Rated Current (mA) 1450 1250 1100 1000 790
No. 1 2 3 4 5
Part Number LQH32CNR15M33 LQH32CNR27M33 LQH32CNR47M33 LQH32CN1R0M33 LQH32CN2R2M33
Continued on the following page.
9 69
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Design Kits
Continued from the preceding page.
No. 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
Part Number LQH32CN4R7M33 LQH32CN100K33 LQH32CN1R0M23 LQH32CN2R2M23 LQH32CN4R7M23 LQH32CN100K23 LQH32CN220K23 LQH32CN470K23 LQH32CN101K23 LQH32CN221K23 LQH32CN331K23 LQH32CN391K23 LQH32CN471K23 LQH32CN561K23 LQH32CN1R0M53 LQH32CN2R2M53 LQH32CN4R7M53 LQH32CN100K53 LQH32CN150K53 LQH32CN220K53 LQH32CN330K53 LQH32CN470K53 LQH32CN680K53 LQH32CN101K53
Quantity (pcs.) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Inductance Nominal 4.7H 10H 1.0H 2.2H 4.7H 10H 22H 47H 100H 220H 330H 390H 470H 560H 1.0H 2.2H 4.7H 10H 15H 22H 33H 47H 68H 100H Tolerance 20% 10% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10%
DC Resistance () 0.1530% 0.330% 0.0930% 0.1330% 0.230% 0.4430% 0.7130% 1.330% 3.530% 8.430% 1030% 1730% 1930% 2230% 0.0630% 0.09730% 0.1530% 0.330% 0.5830% 0.7130% 1.130% 1.330% 2.230% 3.530%
Rated Current (mA) 650 450 800 600 450 300 250 170 100 70 60 60 60 60 1000 790 650 450 300 250 200 170 130 100
oEKLMH43CB (for Choke Winding Type)
Quantity (pcs.) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Inductance Nominal 1.0H 1.5H 2.2H 3.3H 4.7H 6.8H 10H 15H 22H 33H 47H 68H 100H 150H 220H 330H 470H 560H 680H 1000H 1500H 2200H Tolerance 20% 20% 20% 20% 20% 20% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 10% 30% 30% 30% 30% 30% DC Resistance () 0.08 max 0.09 max 0.11 max 0.13 max 0.15 max 0.20 max 0.24 max 0.32 max 0.60 max 1.00 max 1.10 max 1.70 max 2.20 max 3.50 max 4.00 max 6.80 max 8.50 max 7.830% 9.130% 1130% 2330% 2830% Rated Current (mA) 1080 1000 900 800 750 720 650 570 420 310 280 220 190 130 110 100 90 50 40 30 25 20
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Part Number LQH43CN1R0M03 LQH43CN1R5M03 LQH43CN2R2M03 LQH43CN3R3M03 LQH43CN4R7M03 LQH43CN6R8M03 LQH43CN100K03 LQH43CN150K03 LQH43CN220K03 LQH43CN330K03 LQH43CN470K03 LQH43CN680K03 LQH43CN101K03 LQH43CN151K03 LQH43CN221K03 LQH43CN331K03 LQH43CN471K03 LQH3KSN561N23 LQH3KSN681N23 LQH3KSN102N23 LQH3KSN152N23 LQH3KSN222N23
11
10 70
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Information
1. Land Area and Q-F Characteristics
LQH32MN680K23
100 A : Characteristic of coil itself
PCB : Ag-Pb printed land formed on 0.6mm-thick alumina plate Solder : H60A Soldering : Reflow soldering Solder layer : Sections shown by oblique lines in figure
80 2 2.5 B: 1 60 C: Q 2.5 40 1 2.5 (in mm) Characteristic of chip mounted on land B 1.3 1 5.5 1 Characteristic of chip mounted on land A
C 20
0 10k
50k
100k
500k Frequency (Hz)
1M
5M
2. Coupling coefficient versus Coil-to-coil Spacing
LQH32M Series
14 Coil-to-coil Spacing 12
10 Coupling Coefficient (%)
8
6
4 330H 1H 2
0 0 1 2 3 Coil-to-coil Spacing (mm) 4 5 6
71
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. !Note *Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
*This catalog has only typical specifications. Therefore,thereareno space for detailed specifications. Therefore, please approve our productsheet for product specificaions approval sheet for product specifications before ordering. This catalog has only typical specifications because you is requested to approve our product specifications or to transact the approval specifications or transact the before ordering.
O05E9.pdf 03.3.7
www..com
Murata Chip S-Parameter & Impedance Library
Download Service
The program enables you to calculate, view and print graphs of impedance and S parameter of chip capacitors or chip inductors. S parameter data in Touchstone format can also be copied.
Main Window
* Easy operation due to using Windows interface. * Fast calculation of data and graph for S parameter and impedance of chip capacitors or chip inductors. * S parameter is saved in your personal computer and utilized for circuit simulation.
This software uses the Global Part Numbers that have been adopted since June 2001. The Previous Part Numbers can be used by selecting "view" menu. Please check carefully when referring to the contents.
This simulator can be downloaded from Murata web site.
http://www.murata.com/designlib/mcsil.html
72
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
O05E9.pdf 03.3.7
www..com
Note:
1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export.
< <
>
>
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of January 2003. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.
http://www.murata.com/
Head Office 2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp

▲Up To Search▲

Price & Availability of LQW15AXXXXX

	To Download LQW15AXXXXX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .